TITANIUM MONOXIDE
Synonym(s):Titanium monoxide
- CAS NO.:12137-20-1
- Empirical Formula: OTi
- Molecular Weight: 63.87
- MDL number: MFCD00036279
- EINECS: 235-236-5
- SAFETY DATA SHEET (SDS)
- Update Date: 2024-12-18 14:15:30
What is TITANIUM MONOXIDE?
Chemical properties
bronze pellets; fcc; weakly basic oxide with no important industrial uses [HAW93] [STR93] [KIR83]
Chemical properties
Titanium monoxide, TiO, has a rock-salt structure but can exist with both oxygen and titanium vacancies. For stoichiometric TiO, the lattice parameter is 417 pm, but varies from ca 418 pm at 46 atom % to 4162 pm at 54 atom % oxygen. Apparently, stoichiometric TiO has ca 15% of the Ti and O sites vacant. At high temperatures (>900 °C (1,652 °F)), these vacancies are randomly distributed; at low temperatures, they become ordered. Titanium monoxide may be made by heating a stoichiometric mixture of titanium metal and titanium dioxide powders at 1,600 °C (2,912 °F).
Physical properties
Gold-bronze solid. Prepared by mixing stoichiometric amounts of Ti and TiO2 heated in a Mo-crucible at 1600°C or by the reduction of TiO2with H under pressure at 130 atm and 2000°C. Slightly paramagnetic solid with χm = +88 × 10–6 emu.
The Uses of TITANIUM MONOXIDE
Used for vacuum deposition. Also applications include sunscreens and UV-blocking in cosmetics, varnishes, wood preservatives, textile fibers, and packaging films. Also used as paint pigment, opacifying agent, welding rod fluxes, optical coatings, as a catalyst, ceramic finish coat, plastics, elastomers, coated fabrics, printing inks, roofing granules, glass, and in glazes. Also identified as Titanium monoxide.
Definition
ChEBI: Titanium(II) oxide is a titanium oxide containing approximately equal numbers of titanium and oxygen ions.
Preparation
Titanium monoxide or hongquiite (TiO) may be prepared by direct reduction by mixing stoichiometric amounts of titanium metal
and titanium dioxide into a molybdenum crucible at 1600°C or reduction of the titanium
dioxide with hydrogen under pressure at 130 atm and 2000°C.
Ti (s) + TiO2(s) —> 2 TiO(s) (1600°C)
Reactions
On heating the monoxide in air, the compound reverts to other titanium oxides as a function
of temperature increase:
TiO(s) —> Ti2O3(s) (200°C);
TiO(s) —> Ti3O5(s) (250–350°C);
TiO(s) —> TiO2(s) (350°C).
Properties of TITANIUM MONOXIDE
Melting point: | 1700°C |
Boiling point: | >3000°C |
Density | 4,95 g/cm3 |
Flash point: | >3000°C |
form | pieces |
Specific Gravity | 4.95 |
color | yellow cubic crystals, crystalline |
Water Solubility | Soluble in concentrated sulfuric acid, concentrated hydrofluoric acid and alkali. Insoluble in water, diluted sulfuric acid, hydrochloric acid, nitric acid and organic solvents. |
Crystal Structure | Cubic |
Dielectric constant | 110.0(Ambient) |
CAS DataBase Reference | 12137-20-1(CAS DataBase Reference) |
EPA Substance Registry System | Titanium oxide (TiO) (12137-20-1) |
Safety information for TITANIUM MONOXIDE
Signal word | Danger |
Pictogram(s) |
Flame Flammables GHS02 Corrosion Corrosives GHS05 Exclamation Mark Irritant GHS07 Health Hazard GHS08 |
GHS Hazard Statements |
H225:Flammable liquids H260:Substances And Mixtures Which, In Contact With Water,Emit Flammable Gases H302:Acute toxicity,oral H314:Skin corrosion/irritation H335:Specific target organ toxicity, single exposure;Respiratory tract irritation H351:Carcinogenicity H371:Specific target organ toxicity, single exposure H372:Specific target organ toxicity, repeated exposure |
Precautionary Statement Codes |
P201:Obtain special instructions before use. P202:Do not handle until all safety precautions have been read and understood. P210:Keep away from heat/sparks/open flames/hot surfaces. — No smoking. P223:Keep away from any possible contact with water, because of violent reaction and possible flash fire. P233:Keep container tightly closed. P240:Ground/bond container and receiving equipment. P241:Use explosion-proof electrical/ventilating/lighting/…/equipment. P242:Use only non-sparking tools. P243:Take precautionary measures against static discharge. P260:Do not breathe dust/fume/gas/mist/vapours/spray. P264:Wash hands thoroughly after handling. P264:Wash skin thouroughly after handling. P270:Do not eat, drink or smoke when using this product. P271:Use only outdoors or in a well-ventilated area. P280:Wear protective gloves/protective clothing/eye protection/face protection. P231+P232:Handle under inert gas. Protect from moisture. P363:Wash contaminated clothing before reuse. P301+P330+P331:IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P303+P361+P353:IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower. P335+P334:Brush off loose particles from skin. Immerse in cool water/wrap in wet bandages. P370+P378:In case of fire: Use … for extinction. P405:Store locked up. P402+P404:Store in a dry place. Store in a closed container. P403+P233:Store in a well-ventilated place. Keep container tightly closed. P403+P235:Store in a well-ventilated place. Keep cool. |
Computed Descriptors for TITANIUM MONOXIDE
TITANIUM MONOXIDE manufacturer
New Products
(S)-3-Aminobutanenitrile hydrochloride 4-Methylphenylacetic acid N-Boc-D-alaninol N-BOC-D/L-ALANINOL Tert-butyl bis(2-chloroethyl)carbamate 3-Morpholino-1-(4-nitrophenyl)-5,6-dihydropyridin- 2(1H)-one Furan-2,5-Dicarboxylic Acid Tropic acid 1-Bromo-3,5-Di-Tert-Butylbenzene S-2-CHLORO PROPIONIC ACID ETHYL ISOCYANOACETATE 2-Bromo-1,3-Bis(Dimethylamino)Trimethinium Hexafluorophosphate 4-IODO BENZOIC ACID 3-NITRO-2-METHYL ANILINE 1-(2,4-DICHLOROPHENYL) ETHANAMINE (2-Hydroxyphenyl)acetonitrile 4-Bromopyrazole 2-(Cyanocyclohexyl)acetic acid 4-methoxy-3,5-dinitropyridine 1-(4-(aminomethyl)benzyl)urea hydrochloride 2-aminopropyl benzoate hydrochloride diethyl 2-(2-((tertbutoxycarbonyl)amino) ethyl)malonate tert-butyl 4- (ureidomethyl)benzylcarbamate Ethyl-2-chloro((4-methoxyphenyl)hydrazono)acetateRelated products of tetrahydrofuran
You may like
-
Titanium(II) Oxide CAS 12137-20-1View Details
12137-20-1 -
Titanium(II) Oxide CAS 12137-20-1View Details
12137-20-1 -
Titanium (II) oxide pellets, 8 to 9mm(0.32 to 0.36 in.) dia. x 6 to 7mm(0.24 to 0.28 in.) thick CAS 12137-20-1View Details
12137-20-1 -
1975-50-4 98%View Details
1975-50-4 -
2-HYDROXY BENZYL ALCOHOL 98%View Details
90-01-7 -
2-Chloro-1,3-Bis(Dimethylamino)Trimethinium Hexafluorophosphate 221615-75-4 98%View Details
221615-75-4 -
14714-50-2 (2-Hydroxyphenyl)acetonitrile 98+View Details
14714-50-2 -
118753-70-1 98+View Details
118753-70-1