Ferric oxide

Description

Iron oxides are produced synthetically and consist essentially of anhydrous and/or hydrated iron oxides. The range of hues includesyellows, reds, browns and blacks. Food quality iron oxides are primarily distinguished from technical grades by the comparatively low levels of contamination by other metals. This is achieved by the selection and control of the source of iron and/or by the extent of chemical purification during the manufacturing process. Iron oxides have been used to color confectionery, fillings and decorations for pastry products, cheese products, fish paste, pet foods, cosmetics and pharmaceutical products.

Chemical properties

Hematite is a noncombustible, black to black red or brick-red mineral (iron ore) composed mainly of ferric oxide, Fe2O3. Ferric oxide

Occurrence

Ferric oxide occurs in nature as the mineral hematite. It is the principal ore of iron from which the metal and its alloys are produced. Also, this oxide occurs in the mineral, limonite, 2Fe₂O₃^.3H₂O. An important application of this compound involves producing red, orange, and yellow pigments. Other applications are in coatings for metals, steel and rubber; in ceramics; and as a catalyst for oxidation reactions.

The Uses of Ferric oxide

Ferric Oxide is a nutrient and dietary supplement that is a source of iron.

The Uses of Ferric oxide

As pigment for rubber, paints, paper, linoleum, ceramics, glass; in paint for ironwork, ship hulls; as polishing agent for glass, precious metals, diamonds; in electrical resistors and semiconductors; in magnets, magnetic tapes; as catalyst; colloidal solutions as stain for polysaccharides.

The Uses of Ferric oxide

Red iron oxide (Fe2O3) is an inorganic pigment of either natural or synthetic origin. It is a low chroma red with excellent durability and low cost. Synthetic pigment is made by heating iron sulfate with quicklime in a furnace. The second preparatory technique involves calcining iron sulfate in the presence of air at high temperatures. Natural and oxides of iron are mined either as the mineral hematite (Fe2O3) or as hematite in its hydrated form.

Definition

A high-grade red pigment used as a polishing agent for glass, jewelry, etc. (2) A cosmetic prepared from dried flowers of the saf- flower.

Definition

A black solid prepared by passing either steam or carbon dioxide over redhot iron. It may also be prepared by passing steam over heated iron(II) sulfide. Triiron tetroxide occurs in nature as the mineral magnetite. It is insoluble in water but will dissolve in acids to give a mixture of iron(II) and iron(III) salts in the ratio 1:2. Generally it is chemically unreactive; it is, however, a fairly good conductor of electricity.

Preparation

Iron(III) oxide is prepared as a reddish-brown hydrated precipitate by treating an aqueous solution of an iron(III) salt with caustic soda:
2FeCl₃ + 6NaOH → Fe₂O₃?3H₂O + 6NaCl
It also is obtained by thermal decomposition of iron(II) sulfate or the brown oxide hydroxide:
2FeSO₄ → Fe₂O₃ + SO₂ + SO₃
2FeO(OH) → Fe₂O₃ + H₂O
The oxide is prepared in industrial scale by first precipitating iron(II) hydroxide Fe(OH)2 by treating aqueous solutions of iron(II) sulfate and caustic soda. The Fe(OH)2 is then oxidized to iron(III) hydroxide by aeration. The latter is dehydrated by heating:
Fe₂+ (aq) + OHˉ (aq) → Fe(OH)₂(s) → 2Fe(OH)₃ → Fe₂O₃ + 3H₂O
It also is produced by ignition of iron(III) oxalate and iron carbonyls:
2Fe₂(C₂O₄)₃ +3O₂ → 2Fe₂O₃ + 12CO
.

Hazard

Pneumoconiosis. Questionable carcinogen.

Flammability and Explosibility

Non flammable

Potential Exposure

Hematite; as an iron ore composed mainly of ferric oxide, is a major source of iron and is used as a pigment for rubber, paints, paper, linoleum, ceramics, dental restoratives; and as a polishing agent for glass and pre cious metals. It is also used in electrical resistors, semiconduc tors, magnets, and as a catalyst. Human exposure to hematite from underground hematite mining is principally through inhalation and/or ingestion of dusts. No estimates are available concerning the number of underground miners exposed.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irri gate immediately for at least15 min, occasionally lifting upper and lower lids. Seek med-ical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from exposure,begin rescue breathing (using universal precautions, includ-ing resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medi-cal attention. Give large quantities of water and induce :vomiting. Do not make an unconscious person vomit.Note to physician: For severepoisoning，do not useBAL .[British Anti-Lewisite， dimercaprol, dithiopropanol (C3HgOS2)] as it is contraindicated or ineffective in poisoningfrom iron.

Carcinogenicity

Welders are typically exposed to a complex mixture of dust and fume of metallic oxides, as well as irritant gases, and are subject to mixeddust pneumoconiosis with possible loss of pulmonary function; this should not be confused with benign pneumoconiosis caused by iron oxide.1 Although an increased incidence of lung cancer has been observed among hematite miners exposed to iron oxide, presumably owing to concomitant radon gas exposure, there is no evidence that iron oxide alone is carcinogenic to man or animals.6

storage

Color Code- Green: General storage may be used.Prior to working with this chemical you should be trainedonits proper handling and storage. Store in tightly closedcontainers in a cool, well-ventilatedarea. .Where possible,automatically transfer material from other storage contain-ers to process containers A regulated, marked area shouldbe established where this chemical is handled, used, orstored in compliance with OSHA Standard 1910.1045.

Properties and Applications

TEST ITEMS	SPECIFICATION
APPEARANCE	DARK RED POWDER
SHADE	CLOSE TO STANDARD
CONTENT OF Fe 2 O 3	96% min
pH VALUE	3-7
OIL ABSORPTION	15-25%
RESIDUE ON 320 MESH	0.3% max
WATER SOLUBLE	0.3% max
VOLATITE 105 °C	1.0% max
TINTING STRENGTH	98-102 %

Incompatibilities

Contact with hydrogen peroxide, ethyl ene oxide, calcium hypochlorite will cause explosion. Violent reaction with powdered aluminum; hydrazine, hydrogen trisulfide.