HYDRIDE TERMINATED POLYDIMETHYLSILOXANE
Synonym(s):Hydrogen-terminated di-Me silicones
- CAS NO.:70900-21-9
- Empirical Formula: C6H20O2Si3
- Molecular Weight: 208.4783
- MDL number: MFCD00197934
- SAFETY DATA SHEET (SDS)
- Update Date: 2024-07-12 17:58:41
What is HYDRIDE TERMINATED POLYDIMETHYLSILOXANE?
Description
Polydimethylsiloxane hydride terminated is soluble in many organic solvents, such as aromatic hydrocarbon and petroleum hydrocarbons, and so on. it is a kind of widely used organic silicon intermediates, and can be used as organic silicon blocking agent usually. Due to containing reactive Si-H groups in the molecular structure, it can be used in the synthesis of copolymer macromolecule by hydrosilylation. The synthesis of copolymer macromolecule can be made into a series of reactive silicone oil.
The Uses of HYDRIDE TERMINATED POLYDIMETHYLSILOXANE
1. Hydride Terminated Polydimethylsiloxane Can be Used in manufacture of a variety of end group reactive linear modified silicone oil, modification of the reaction, such as plastic resin.
2. The key intermediates of block copolymerization reaction.
3. can be used as chain extension agent for addition liquid silicone rubberm, crosslinking agent for addition liquid silicone rubber.
The Uses of HYDRIDE TERMINATED POLYDIMETHYLSILOXANE
HYDRIDE TERMINATED POLYDIMETHYLSILOXANE is the hydride terminated form of polydimethylsiloxane, which belongs to a group of polymeric organosilicon compounds. It can be used as a common surfactant and an antifoaming agent. It can also be applied as the active silicone fluid in automotive viscous limited slip differentials and couplings. Moreover, it is commonly used as a stamp resin in the field of soft lithography. Finally, it can also be supplemented to the over-the-counter drugs as an antifoaming agent and carminative. For example, it is seen in many skin care and beauty products to prevent water and moisture loss in the skin through forming a hydrating barrier.
References
https://en.wikipedia.org/wiki/Polydimethylsiloxane
https://www.truthinaging.com/ingredients/polydimethylsiloxane
Properties of HYDRIDE TERMINATED POLYDIMETHYLSILOXANE
Melting point: | <-60°C |
Boiling point: | 230 °C(lit.) |
Density | 0.971 g/mL at 25 °C |
refractive index | n |
Flash point: | 215 °F |
Specific Gravity | 0.90 |
EPA Substance Registry System | Siloxanes and Silicones, di-Me, hydrogen-terminated (70900-21-9) |
Safety information for HYDRIDE TERMINATED POLYDIMETHYLSILOXANE
Signal word | Warning |
Pictogram(s) |
Exclamation Mark Irritant GHS07 |
GHS Hazard Statements |
H315:Skin corrosion/irritation H319:Serious eye damage/eye irritation H335:Specific target organ toxicity, single exposure;Respiratory tract irritation |
Precautionary Statement Codes |
P261:Avoid breathing dust/fume/gas/mist/vapours/spray. P264:Wash hands thoroughly after handling. P264:Wash skin thouroughly after handling. P271:Use only outdoors or in a well-ventilated area. P280:Wear protective gloves/protective clothing/eye protection/face protection. P302+P352:IF ON SKIN: wash with plenty of soap and water. P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing. |
Computed Descriptors for HYDRIDE TERMINATED POLYDIMETHYLSILOXANE
New Products
4-AMINO-TETRAHYDRO-PYRAN-4-CARBOXYLIC ACID HCL 4-(Dimethylamino)tetrahydro-2H-pyran-4-carbonitrile 4-Aminotetrahydropyran-4-carbonitrile Hydrochloride (R)-3-Aminobutanenitrile Hydrochloride 3-((Dimethylamino)methyl)-5-methylhexan-2-one oxalate 1,4-Dioxa-8-azaspiro[4.5]decane 5-Bromo-2-nitropyridine Nimesulide BP Aceclofenac IP/BP/EP Diclofenac Sodium IP/BP/EP/USP Mefenamic Acid IP/BP/EP/USP Ornidazole IP Diclofenac Potassium THOMAIND PAPER PH 2.0 TO 4.5 1 BOX BUFFER CAPSULE PH 9.2 - 10 CAP SODIUM CHLORIDE 0.1N CVS ALLOXAN MONOHYDRATE 98% PLATINUM 0.5% ON 3 MM ALUMINA PELLETS (TYPE 73) LITHIUM AAS SOLUTION 2-Bromo-1-(bromomethyl)-3-chloro-5-nitrobenzene 2-Bromo-3-nitroaniline N-(3-Hydroxypropyl)-N-methylacetamide 3-Bromo-6-chloropyridazine 4-ethyl-3-nitrobenzoic acidRelated products of tetrahydrofuran
You may like
-
Poly(dimethylsiloxane), hydride terminated CAS 70900-21-9View Details
70900-21-9 -
Poly(dimethylsiloxane), hydride terminated CAS 70900-21-9View Details
70900-21-9 -
Poly(dimethylsiloxane), hydride terminated CAS 70900-21-9View Details
70900-21-9 -
1823368-42-8 98%View Details
1823368-42-8 -
2-(3-(tert-butyl)phenoxy)-2-methylpropanoic acid 1307449-08-6 98%View Details
1307449-08-6 -
Ethyl 3-(furan-2-yl)-3-hydroxypropanoate 25408-95-1 98%View Details
25408-95-1 -
2-Chloro-5-fluoro-1-methoxy-3-methylbenzene 98%View Details
1805639-70-6 -
Lithium ClavulanateView Details
61177-44-4