Hydrogen peroxide

Absorption

It is reported that hydrogen peroxide is decomposed before absorption in the intestine. Solutions of hydrogen peroxide displays poor penetration when applied to tissue .

Toxicity

Oral LD50 in mouse is 2000 mg/kg, and dermal LD50 is 4060 mg/kg in rat and 2000 mg/kg pig. LC50 of hydrogen peroxide vapours in rat is 2000 mg/m at 4 hours .
Oral ingestion of high dose hydrogen peroxide may cause chest and stomach pain, loss of consciousness, motor disorders, microhemorrhages and moderate leucocytosis in humans. Inhalation of highly concentrated vapours causes extreme irritation of nose and throat .
Hydrogen peroxide has no known carcinogenic potential. It was shown to be mutagenic to bacteria (Salmonella typhimurium) and the fungi, Neurospora crassa and Aspergillis chevallieri, and induced DNA damage in Escheria coli . It also caused sister chromatid exchanges and chromosomal aberrations in mammalian cells in vitro .

Description

Hydrogen peroxide (H2O2) is a strong oxidizing agent that is used extensively in industry and medicine. It is usually available as aqueous solutions in concentrations of 3, 30 or 90 percent by weight. The 3 percent solution is used as a topical antiseptic and cleansing agent, and as a constituent in mouthwashes, dentifrices and sanitary lotions; the 30 percent as an effective bleaching agent and for other industrial uses; and the 90 percent as a vigorous oxidizer of rocket fuels. The anhydrous form is a colorless, bittertasting liquid with an ozone-like odor. In the absence of stabilizing agents (e.g., phosphates, tin), hydrogen peroxide solutions are unstable and decompose upon standing, agitation, exposure to light, or heating. Hydrogen peroxide reacts vigorously with many oxidizing as well as reducing agents. Concentrated solutions are highly caustic to the skin. In addition to its effectiveness as a bleach, hydrogen peroxide has proved to be a useful antimicrobial agent. This latter property has been utilized in some countries as a preservative of milk and whey.

Description

Hydrogen peroxide, found in medicine cabinets around the world, is a powerful oxidizing agent. On human skin, an enzyme unlocks the oxidizing potential allowing it to kill germs. Concentrated hydrogen peroxide is used as a reactant in glow sticks, color safe bleach, and even rocket fuels.

Description

Hydrogen peroxide is the simplest peroxide and is considered a strong oxidizer. It exists as a colorless liquid and is miscible with H2O in all proportions. For laboratory purposes 30% Hydrogen peroxide (in H2O) is most common.

Chemical properties

Colorless liquid; pure compound or 90% solution unstable; bitter taste; density 1.463 g/mL; boils at 150.2°C; freezes at –0.43°C; vapor pressure 9.9 torr at 50°C and 121.5 torr at 100°C; viscosity 1.245 centipoise at 20°C; surface tension 80.4 dyn/cm at 20°C; miscible with water in all proportions; soluble in ether; densities of 30%, 70%, and 90% H2O2 solutions are 1.1081, 1.2839 and 1.3867 g/mL, respectively, at 25°C; freezing points at these concentrations are –25.7°C, –40.3°C and –11.5°C, respectively; and their boiling points are 106.2°C, 125.5°C and 141.3°C, respectively; decomposed by many organic solvents; pKa at 25°C is 11.62.

Physical properties

Colorless liquid; pure compound or 90% solution unstable; bitter taste; den-sity 1.463 g/mL; boils at 150.2°C; freezes at -0.43°C; vapor pressure 9.9 torrat 50°C and 121.5 torr at 100°C; viscosity 1.245 centipoise at 20°C; surfacetension 80.4 dyn/cm at 20°C; miscible with water in all proportions; soluble inether; densities of 30%, 70%, and 90% H₂O₂solutions are 1.1081, 1.2839 and1.3867 g/mL, respectively, at 25°C; freezing points at these concentrations are-25.7°C, -40.3°C and -11.5°C, respectively; and their boiling points are106.2°C, 125.5°C and 141.3°C, respectively; decomposed by many organic sol-vents; pKaat 25°C is 11.62.

History

Hydrogen peroxide was prepared first by Thenard in 1818. It has many industrial applications. Aqueous solutions at varying concentrations are used for bleaching fabrics, silks, furs, feathers and hair; as a dough conditioner; and a bleaching and oxidizing agent in foods; for cleaning metals; as a laboratory reagent for oxidation; as an antiseptic; in sewage and wastewater treatment; and in preparation of inorganic and organic peroxides. An 80% concentrated solution is used in rocket propulsion.

The Uses of Hydrogen peroxide

hydrogen peroxide is a bleaching and oxidizing agent, detergent, and antiseptic. It is generally recognized as a safe preservative, germ killer, and skin bleacher in cosmetics. If used undiluted, it can cause burns of the skin and mucous membranes.

The Uses of Hydrogen peroxide

A mixture of the SM (1.7 g, 3.3 mmol), AcOH (15 mL), Na2WO4 (209 mg, 0.60 mmol), H2O2 (50%, 2.3 mL, 6.6 mmol) was stirred at RT overnight. The solvent was removed in vacuo and ice/H2O was added to the residue. The mixture was extracted with DCM. The combined organics were dried, concentrated, and purified by silica gel chromatography to provide the product. [1.65 g, 90%]

The Uses of Hydrogen peroxide

Antiinfective, topical.

The Uses of Hydrogen peroxide

Hydrogen peroxide is used for bleaching silk, fabrics, feathers, and hairs; in refining oils and fats; for cleaning metals surfaces; as an antiseptic; and in rocket propulsion (90% solution). It is marketed as an aqueous solution of 3-90% by weight.

The Uses of Hydrogen peroxide

Synthesized hydrogen peroxide is approximately 60% H₂O₂ by weight and is distilled tohigher concentrations and diluted to lower concentrations for intended purposes. Food grade hydrogen peroxide comes in 35% and 50% concentrations. It is usedfor disinfecting purposes and also as an ingredient in cosmetics, shampoos, and medications.Reagent hydrogen peroxide for chemical and medical laboratories has a concentration of 30%.Standard grades of 35%, 50%, 60%, and 70% are used for industrial bleaching. Generalhousehold hydrogen peroxide is 3% H₂O₂ and 6% is used by beauticians for hair coloring.Very high grades such as 90% are used as oxidizers in rocket propulsion.

Hydrogen peroxide has a number of environmental uses. Hydrogen peroxide has a number of environmental uses. These include water treatment, odorcontrol, oxidation of pollutants, and corrosion control. Hydrogen peroxide is used to removeiron, manganese, and hydrogen sulfide from water supplies and wastewater. The oxidation ofsubstances such as hydrogen sulfide reduces odors. Because H₂O₂ decomposes into oxygen andwater, it has the added advantage of lowering the biological oxygen demand of wastewater.ese include water treatment, odorcontrol, oxidation of pollutants, and corrosion control. Hydrogen peroxide is used to removeiron, manganese, and hydrogen sulfide from water supplies and wastewater. The oxidation ofsubstances such as hydrogen sulfide reduces odors. Because H₂O₂ decomposes into oxygen andwater, it has the added advantage of lowering the biological oxygen demand of wastewater.

Hydrogen peroxide is used in chemical synthesis and can function as both an oxidizing andreducing agent. Caro’s acid (H₂SO₅) is made using H₂O₂. Peracetic acid (C₂H₄O₃) is producedby reacting acetic acid and hydrogen peroxide and is used as a disinfectant. Solid bleachingagents such as perborates and percarbonates are made using H2O2. It is used in epoxida tionand hydroxylation reactions. Epoxidation reactions involve the breaking of double bondsin alkenes, with the carbons then bonding to the same oxygen atom to form an epoxide ring.

Indications

Indicated to be used as a disinfectant and sterilizer.

Background

Hydrogen peroxide is the simplest peroxide with a chemical formula H2O2. Hydrogen peroxide is an unstable compound in the presence of a base or catalyst, and is typically stored with a stabilizer in a weakly acidic solution. If heated to its boiling point, it may undergo potentially explosive thermal decomposition. Hydrogen peroxide is formed in the body of mammals during reduction of oxygen either directly in a two-electron transfer reaction . As a natural product of metabolism, it readily undergoes decomposition by catalase in normal cells .
Due to its potent and broad-spectrum antimicrobial actions, hydrogen peroxide is used in both liquid and gas form for preservative, disinfection and sterilization applications as an oxidative biocide . It is used in industrial and cosmetic applications as a bleaching agent. Hydrogen peroxide is also considered as a generally recognized as safe compound by the FDA ; it is used as an antimicrobial agent in starch and cheese products, and as an oxidizing and reducing agent in products containing dried eggs, dried egg whites, and dried egg yolks.

What are the applications of Application

Hydrogen Peroxide is a widely employed oxidizing reagent, disinfectant, antiseptic, propellant, and in synthetic chemistry, epoxidizing agent.

Definition

ChEBI: An inorganic peroxide consisting of two hydroxy groups joined by a covalent oxygen-oxygen single bond.

Preparation

Hydrogen peroxide is commercially produced by autooxidation of ethyl anthraquinol in a solvent such as toluene or ethylbenzene. The product ethyl anthraquinone is reduced by hydrogen over supported nickel or platinum catalyst to regenerate back the starting material, ethyl anthraquinol for a continuous production of H2O2. The reaction steps are:


Hydrogen peroxide may also be made by heating 2-propanol with oxygen at 100°C under 10 to 20 atm pressure: (CH3)2CHOH (CH3)2C(OH)OOH → CH3COCH3 + H2O2 Vapor phase partial oxidation of hydrocarbons also yield H2O2. However, several by-products are generated, the separations of which make the process difficult and uneconomical.
Hydrogen peroxide may also be prepared by treating barium peroxide with dilute sulfuric acid:
BaO2 + 2H2SO4 → H2O2 + BaSO4
Another preparative method involves electrolytic conversion of aqueous sulfuric acid to peroxydisulfate followed by hydrolysis to H2O2 (Weissenstein process). The reaction steps are as follows:

2H2SO4 → H2S2O8 + H2
H2SO5 + H2O → H2SO4 + H2SO5 H2SO5 + H2O → H2O2 + H2SO4
An earlier method, which currently is no longer practiced commercially, involved oxidation of phenyl hydrazine: Hydrogen peroxide obtained this way may contain many impurities, depending on the process used. Such impurities are removed by ion exchange, solvent extraction, and distillation. Dilute solutions of H2O2 may be purified
and concentrated by fractional distillation at reduced pressures.

Definition

hydrogen peroxide: A colourlessor pale blue viscous unstable liquid,H₂O₂; r.d. 1.44; m.p. –0.41°C; b.p.150.2°C. As with water, there is considerablehydrogen bonding in theliquid, which has a high dielectricconstant. It can be made in the laboratoryby adding dilute acid to bariumperoxide at 0°C. Large quantitiesare made commercially by electrolysisof KHSO₄.H₂SO₄ solutions. Anotherindustrial process involvescatalytic oxidation (using nickel, palladium,or platinum with an anthraquinone)of hydrogen and waterin the presence of oxygen. Hydrogenperoxide readily decomposes in lightor in the presence of metal ions togive water and oxygen. It is usuallysupplied in solutions designated byvolume strength. For example, 20-volume hydrogen peroxide wouldyield 20 volumes of oxygen per volumeof solution. Although the peroxidesare formally salts of H2O2, thecompound is essentially neutral.Thus, the acidity constant of the ionizationH₂O₂ + H₂O ?H₃O⁺ + HO_2–is 1.5 × 10^-12 mol dm^-3. It is a strongoxidizing agent, hence its use as amild antiseptic and as a bleachingagent for cloth, hair, etc. It has alsobeen used as an oxidant in rocketfuels.

Production Methods

From 1920 to 1950, the primary method of production was electrolysis. One process involved passing electric current through sulfuric acid to produce the peroxydisulfate ion (S2O8 2-), which was then hydrolyzed to H2O2: 2H₂O + S₂O₈^2- (aq) 2H₂SO₄^-(aq) + H₂O₂(aq).the relatively high cost of electricity of this method encouraged a search for a more economical production process. Hydrogen peroxide is currently produced on a large scale using the anthraquinone autooxidation procedure, which was developed in the 1940s. In this process, an anthraquinone, typically 2-ethyl-anthraquinone, is hydrogenated to a hydroquinone (2-ethyl-anthrahydroquinone) then reoxidized back to the anthraquinone (2-ethyl-anthraquinone) while forming hydrogen peroxide . A metal palladium or nickel catalyst is used to convert the anthraquinone to the hydroquinone, followed by autooxidation in air to generate hydrogen peroxide. The anthraquinone and hydrogen peroxide are separated; the former is recycled to repeat the process while the hydrogen peroxide is purified.

Reactions

Hydrogen peroxide reacts with many compounds, such as borates, carbonates, pyrophosphates, sulfates, silicates, and a variety of organic carboxylic acids, esters, and anhydrides to give peroxy compounds or peroxyhydrates. A number of these compounds are stable solids that hydrolyze readily to give hydrogen peroxide in solution.

General Description

A colorless liquid dissolved in water. Vapors may irritate the eyes and mucous membranes. May violently decompose on contact with most common metals and their compounds. Contact with combustible material may result in spontaneous ignition. Corrosive to tissue. Under exposure to fire or heat containers may violently rupture due to decomposition. Used to bleach textiles and wood pulp, in chemical manufacturing, food processing, and in water purification.

Air & Water Reactions

Water soluble.

Reactivity Profile

The hazards associated with the use of HYDROGEN PEROXIDE(especially highly concentrated solutions) are well documented. There is a release of enough energy during the catalytic decomposition of 65% peroxide to evaporate all water and ignite nearby combustible materials. Most cellulose materials contain enough catalyst to cause spontaneous ignition with 90% peroxide. Contamination of concentrated peroxide causes the possibility of explosion. Readily oxidizable materials, or alkaline substances containing heavy metals may react violently. Solvents(acetone, ethanol, glycerol) will detonate on mixture with peroxide of over 30% concentration, the violence increasing with concentration. Concentrated peroxide may decompose violently in contact with iron, copper, chromium, and most other metals or their salts, and dust(which frequently contain rust). During concentration under vacuum of aqueous or of aqueous-alcoholic solutions of hydrogen peroxide, violent explosions occurred when the concentration was sufficiently high(>90%), [Bretherick 2nd ed., 1979]. Hydrogen selenide and hydrogen peroxide undergo a very rapid decomposition, [Mellor 1:941(1946-1947)].

Hazard

Hydrogen peroxide is a strong oxidizing agent. Concentrated solutions, even a 30% aqueous solution, should be handled carefully. The compound decomposes violently in the presence of trace impurities. Inhibitors are, therefore, added at trace levels to prevent decomposition. Explosion can occur when concentrated solutions are heated or brought in contact with a number of organic substances that are readily oxidizable or that form organic peroxides, such as alcohols, aldehydes, ketones, anhydrides, and carboxylic acids (Patnaik, P. 1999. A Comprehensive Guide to the Hazardous Properties of Chemical Substances, 2nd ed. New York: John Wiley & Sons). Also, reactions with metals, metal alloys, a number of metal salts and oxides, and concentrated mineral acids can proceed to explosive violence.

Health Hazard

TOXIC; inhalation, ingestion or contact (skin, eyes) with vapors, dusts or substance may cause severe injury, burns or death. Fire may produce irritating and/or toxic gases. Toxic fumes or dust may accumulate in confined areas (basement, tanks, hopper/tank cars, etc.). Runoff from fire control or dilution water may cause pollution.

Health Hazard

Contact with aqueous concentrations of less than 50% cause skin irritation, but more concentrated solutions of H202 are corrosive to the skin. At greater than 10% concentration, hydrogen peroxide is corrosive to the eyes and can cause severe irreversible damage and possibly blindness. Hydrogen peroxide is moderately toxic by ingestion and slightly toxic by inhalation. This substance is not considered to have adequate warning properties. Hydrogen peroxide has not been found to be carcinogenic in humans. Repeated inhalation exposures produced nasal discharge, bleached hair, and respiratory tract congestion, with some deaths occurring in rats and mice exposed to concentrations greater than 67 ppm

Health Hazard

Concentrated solutions of hydrogen peroxide are very caustic and can cause burns of skin and mucous membranes. Exposure to its vapors can produce body irritation, lacrimation, sneezing, and bleaching of hair. A dose of 500 mg/kg by dermal route caused convulsions and deaths in rabbits. The oral LD50 value for 90% peroxide solution in mice is 2000 mg/kg.
Oral administration of hydrogen peroxide produced tumors in gastrointestinal tract in mice. There is limited evidence of carcinogenicity in animals. Cancercausing effects of hydrogen peroxide in humans are unknown. Padma and coworkers (1989) reported the promoting effect of hydrogen peroxide on tobacco-specific Nnitrosoamines in inducing tumors in the lung, liver, stomach, and cheek pouch in Syrian golden hamsters and mice. The incidence of cheek pouch tumors increased when peroxide was administered concurrently or applied for a long period after a low initiator dose of N-nitrosamines. .

Fire Hazard

May explode from friction, heat or contamination. These substances will accelerate burning when involved in a fire. May ignite combustibles (wood, paper, oil, clothing, etc.). Some will react explosively with hydrocarbons (fuels). Containers may explode when heated. Runoff may create fire or explosion hazard.

Fire Hazard

Hydrogen peroxide is not flammable, but concentrated solutions may undergo violent decomposition in the presence of trace impurities or upon heating

Flammability and Explosibility

Hydrogen peroxide is not flammable, but concentrated solutions may undergo violent decomposition in the presence of trace impurities or upon heating.

Contact allergens

Hydrogen peroxide is an oxidizing agent used as a topi- cal antiseptic, and as part of permanent hair-dyes and color-removing preparations, and as a neutralizing agent in permanent waving. The concentration of the hydrogen peroxyde solution is expressed in volume or percentage: Ten volumes correspond to 3%. It is an irritant.

Pharmacokinetics

Hydrogen peroxide exhibits antimicrobial properties against most forms of microorganisms, including dormant forms with known high resistance profiles, such as bacterial spores and protozoal cysts. It acts as an oxidative biocide to generate free radical species to induce DNA, protein and membrane lipid damage via oxidation.

Toxicology

Hydrogen peroxide is used as an agent to reduce the number of bacteria in dairy products or other foodstuffs. In the dairy industry, hydrogen peroxide also has been used as a substitute for heat pasteurization in the treatment of milk and as a direct preservative in keeping the quality of the milk. In Japan, it has been used as a preservative for fish-paste products. Hydrogen peroxide also has a bleaching effect. The use of highly pure hydrogen peroxide in manufactured cheese has been approved by the United States Food and Drug Administration (industrial grade hydrogen peroxide is usually a 3–35% aqueous solution; a commercial home product is a 3% aqueous solution).
Acute toxicities (LD50) of hydrogen peroxide for rats are 700 mg/kg/b.w. and 21 mg/kg/b.w. by subcutaneous injection and intravenous injection, respectively. When large amounts of hydrogen peroxide were injected directly into the stomachs of rats, weight and blood protein concentrations were changed slightly. When hydrogen peroxide was mixed with feed, however, no abnormalities were observed. The use of bactericides has been limited due to their toxicity to humans, and only hydrogen peroxide currently is recognized for use.

Potential Exposure

PotentialExposure:CompoundDescription: Drug,Tumorigen，Mutagen， Human Data; Hormone， PrimaryIrritant (90%); Mutagen, Human Data (20%). Hydrogenperoxide is used in the manufacture of acetone, antichlor,antiseptics, benzoyl peroxide, buttons, disinfectants, phar-maceuticals, felt hats, plastic foam, rocket fuel, sponge rub-ber, and pesticides; as a food and feed additive; flavor; as apackaging material; in bleaching bone; feathers, flour, fruit,fur, gelatin, glue, hair, ivory, silk, soap, straw, textiles, wax,and wood pulp; and as an oxygen source in respiratory pr0-tective equipment. Other specific occupations with potentialexposure include liquor and wine agers, dyers, electropla-ters, fat refiners, photographic film developers, wool prin-ters, veterinarians, and water treaters.

First aid

If this chemical gets into the eyes, remove anycontact lenses at once and irrigate immediately for at least15 min, occasionally lifting upper and lower lids. Seek med-ical attention immediately. If this chemical contacts theskin, remove contaminated clothing and wash immediatelywith soap and water. Seek medical attention immediately. Ifthis chemical has been inhaled, remove from ex posure,begin rescue breathing (using universal precautions, includ-ing resuscitation mask) if breathing has stopped and CPR ifheart action has stopped. Transfer promptly to a medicalfacility. When this chemical has been swallowed, get medi-cal attention. If victim is conscious, administer water ormilk. Do not induce vomiting. Medical observation isrecommended for 24- -48 h after breathing overexposure, aspulmonary edema may be delayed. As first aid for pulmo-nary edema, a doctor or authorized paramedic may consideradministering a corticosteroid spray.

Carcinogenicity

Chronic studies in mice found adenomas and carcinomas of the duodenum after oral administration. The IARC has determined that there is limited evidence in experimental animals for the carcinogenicity of hydrogen peroxide and inadequate evidence in humans.

Metabolism

Hydrogen peroxide is reduced by glutathione peroxidase, which is an endogenous enzyme in human tissue. It is rapidly decomposed to oxygen and water when in contact with catalase, an enzyme found in blood and most tissues .

storage

Use extreme care when carrying out reactions with hydrogen peroxide because of the fire and explosion potential (immediate or delayed). The use of safety shields is advisable, and is essential for experiments involving concentrated (>50%) solutions of hydrogen peroxide. Sealed containers of hydrogen peroxide can build up dangerous pressures of oxygen, owing to slow decomposition.

Shipping

Hydrogen peroxide, stabilized, or hydrogen per-oxide aqueous solutions, stabilized with > 60% hydrogenperoxide，requirea shipping label of “OXIDIZER,CORROSIVE." It falls in Hazard Class 5.1 and PackingGroup I.Hydrogen peroxide, aqueous solutions with > > 40% but not>60% hydrogen peroxide (stabilized as necessary), requiresa shipping label of“OXIDIZER, CORROSIVE." It falls inHazard Class 5.1 and Packing Group II.Hydrogen peroxide, aqueous solutions with not < 20% butnot >40% hydrogen peroxide (stabilized as necessary), requires a shipping label of“OXIDIZER, CORROSIVE."" Itfalls in Hazard Class 5.1 and Packing Group II.Hydrogen peroxide, aqueous solutions with not < <8% but<20% hydrogen peroxide (stabilized as necessary), requiresa shipping label of“OXIDIZER" It falls in Hazard Class5.1 and Packing Group III.

Purification Methods

The 30% material has been steam distilled using distilled water. Gross and Taylor [J Am Chem Soc 72 2075 1950] made 90% H2O2 approximately 0.001M in NaOH and then distilled it under its own vapour pressure, keeping the temperature below 40o, the receiver being cooled with a Dry-ice/isopropyl alcohol slush. The 98% material has been rendered anhydrous by repeated fractional crystallisation in all-quartz vessels. EXPLOSIVE IN CONTACT WITH ORGANIC MATERIAL.

Incompatibilities

Contact with many organic compounds can lead to immediate fires or violent explosions (consult Bretherick for references and examples). Hydrogen peroxide reacts with certain organic functional groups (ethers, acetals, etc.) to form peroxides, which may explode upon concentration. Reaction with acetone generates explosive cyclic dimeric and trimeric peroxides. Explosions may also occur on exposure of hydrogen peroxide to metals such as sodium, potassium, magnesium, copper, iron, and nickel.

Waste Disposal

Excess hydrogen peroxide and waste material containing this substance should be placed in an appropriate container, clearly labeled, and handled according to your institution's waste disposal guidelines. For more information on disposal procedures, see Chapter 7 of this volume.