101-68-8
Product Name:
4,4'-Diphenylmethane diisocyanate
Formula:
C15H10N2O2
Synonyms:
4,4′-Methylenebis(phenyl isocyanate);4,4′-Methylenediphenyl diisocyanate;Methylenediphenylene diisocyanate;Bis(4-isocyanatophenyl)methane;4,4′-Diphenylmethane diisocyanate
Inquiry
CHEMICAL AND PHYSICAL PROPERTIES
Physical Description | Diphenylmethane-4,4-diisocyanate is a light yellow colored solid. It is not soluble in water. It may be toxic by ingestion, inhalation, or skin absorption. If in a solution it may or may not burn depending on the nature of the material and/or the solvent. It is used to make plastics. |
---|---|
Color/Form | Light-yellow, fused solid |
Odor | Odorless |
Boiling Point | 381 to 390 °F at 5 mmHg (NTP, 1992) |
Melting Point | 99 °F (NTP, 1992) |
Flash Point | 425 °F (NTP, 1992) |
Solubility | Insoluble (NTP, 1992) |
Density | 1.2 at 68 °F (USCG, 1999) - Denser than water; will sink |
Vapor Density | Relative vapor density (air = 1): 8.6 |
Vapor Pressure | 5e-06 mmHg at 77 °F (NIOSH, 2023) |
Autoignition Temperature | 240 °C |
Decomposition | When heated to decomposition it emits toxic fumes of /nitrogen oxides and sulfur oxides/. |
Odor Threshold | Odor Threshold Low: 0.39 [mmHg] Odor threshold from AIHA |
Refractive Index | Index of refraction: 1.5906 at 50 °C/D |
Other Experimental Properties | VAPOR PRESSURE: 0.0075 MM HG @ 94 °C /TECHNICAL PRODUCT/ |
Chemical Classes | Plastics & Rubber -> Diisocyanates |
SAFETY INFORMATION
Signal word | Danger |
---|---|
Pictogram(s) |
Exclamation Mark Irritant GHS07 Health Hazard GHS08 |
GHS Hazard Statements |
H315:Skin corrosion/irritation H317:Sensitisation, Skin H319:Serious eye damage/eye irritation H332:Acute toxicity,inhalation H334:Sensitisation, respiratory H335:Specific target organ toxicity, single exposure;Respiratory tract irritation H351:Carcinogenicity H373:Specific target organ toxicity, repeated exposure |
Precautionary Statement Codes |
P202:Do not handle until all safety precautions have been read and understood. P260:Do not breathe dust/fume/gas/mist/vapours/spray. P280:Wear protective gloves/protective clothing/eye protection/face protection. P302+P352:IF ON SKIN: wash with plenty of soap and water. P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing. P308+P313:IF exposed or concerned: Get medical advice/attention. |
COMPUTED DESCRIPTORS
Molecular Weight | 250.25 g/mol |
---|---|
XLogP3 | 5.4 |
Hydrogen Bond Donor Count | 0 |
Hydrogen Bond Acceptor Count | 4 |
Rotatable Bond Count | 4 |
Exact Mass | 250.074227566 g/mol |
Monoisotopic Mass | 250.074227566 g/mol |
Topological Polar Surface Area | 58.9 Ų |
Heavy Atom Count | 19 |
Formal Charge | 0 |
Complexity | 332 |
Isotope Atom Count | 0 |
Defined Atom Stereocenter Count | 0 |
Undefined Atom Stereocenter Count | 0 |
Defined Bond Stereocenter Count | 0 |
Undefined Bond Stereocenter Count | 0 |
Covalently-Bonded Unit Count | 1 |
Compound Is Canonicalized | Yes |
PRODUCT INTRODUCTION
description
Diphenylmethane-4,4-diisocyanate is a light yellow colored solid. It is not soluble in water. It may be toxic by ingestion, inhalation, or skin absorption. If in a solution it may or may not burn depending on the nature of the material and/or the solvent. It is used to make plastics.