100-42-5
Product Name:
Styrene
Formula:
C8H8
Synonyms:
Phenylethylene;Phenylethylene, Vinylbenzene;Styrene;Vinylbenzene
Inquiry
CHEMICAL AND PHYSICAL PROPERTIES
| Physical Description | Styrene monomer, stabilized appears as a clear colorless to dark liquid with an aromatic odor. Vapors heavier than air and irritating to the eyes and mucous membranes. Subject to polymerization. If the polymerization takes place inside a closed container, the container may rupture violently. Less dense than water and insoluble in water. Used to make plastics, paints, and synthetic rubber. |
|---|---|
| Color/Form | Colorless to yellowish, oily liquid |
| Odor | Characteristic, sweet, balsamic, almost floral odor that is extremely penetrating |
| Boiling Point | 293 to 295 °F at 760 mmHg (NTP, 1992) |
| Melting Point | -24 to -23 °F (NTP, 1992) |
| Flash Point | 88 °F (NTP, 1992) |
| Solubility | less than 1 mg/mL at 66 °F (NTP, 1992) |
| Density | 0.906 at 68 °F (USCG, 1999) - Less dense than water; will float |
| Vapor Density | 3.6 (Air = 1) |
| Vapor Pressure | 4.3 mmHg at 59 °F ; 9.5 mmHg at 86 °F; 10 mmHg at 95 °F (NTP, 1992) |
| LogP | log Kow = 2.95 |
| Henry's Law Constant | Henry's Law constant = 0.00275 atm cu m/mole at 25 °C |
| Stability/Shelf Life | Stable under recommended storage conditions. Test for peroxide formation before distillation or evaporation. Test for peroxide formation or discard after 1 year. |
| Autoignition Temperature | 914 °F (USCG, 1999) |
| Decomposition | Hazardous decomposition products formed under fire conditions - Carbon oxides. |
| Viscosity | 0.696 cP at 25 °C |
| Corrosivity | Styrene will corrode copper and copper alloys |
| Heat of Combustion | -4,395.63 kJ/mol at 25 °C |
| Heat of Vaporization | 10.50 kcal/mol at 25 °C |
| Surface Tension | 32.3 dynes/cm at 20 °C |
| Ionization Potential | 8.40 eV |
| Polymerization | Polymerizes slowly at room temperature and readily at temp > 65 °C. |
| Odor Threshold | Odor Threshold Low: 0.01 [mmHg] Odor Threshold High: 1.9 [mmHg] Detection odor threshold from AIHA (mean = 0.14 ppm) |
| Refractive Index | Index of refraction: 1.5440 at 25 °C |
| Kovats Retention Index | 914 870 874 880.3 871 900.02 871 876 872 886 888 878 874.35 871 873 875 873 873 885 885 885 880 884 884 885 885 877.8 886 880 893 885 890.5 897.3 873 874.4 874.4 874.4 874.7 874.7 874.9 878 885 878 896 879 895 871 877 878 872 872 881 878 895 878 876 883.8 873 870 875 881 882.7 873.29 875 877 875 880 883 887 872 884 885 885 885 871 871 877 875 873 880 875 878 887 890 878 880 883 866 863 862 871 879 868 875 876 880 886 879 869 868 882 900 900 884 |
| Other Experimental Properties | Heat of polymerization: -154 cal/g (-6.35X10+5 J/kg) |
| Chemical Classes | Plastics & Rubber -> Styrenes |
SAFETY INFORMATION
| Signal word | Danger |
|---|---|
| Pictogram(s) |
 Flame Flammables GHS02  Exclamation Mark Irritant GHS07  Health Hazard GHS08 |
| GHS Hazard Statements |
H226:Flammable liquids H304:Aspiration hazard H315:Skin corrosion/irritation H319:Serious eye damage/eye irritation H332:Acute toxicity,inhalation H335:Specific target organ toxicity, single exposure;Respiratory tract irritation H361:Reproductive toxicity H372:Specific target organ toxicity, repeated exposure H412:Hazardous to the aquatic environment, long-term hazard |
| Precautionary Statement Codes |
P210:Keep away from heat/sparks/open flames/hot surfaces. — No smoking. P273:Avoid release to the environment. P331:Do NOT induce vomiting. P301+P310:IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician. P303+P361+P353:IF ON SKIN (or hair): Remove/Take off Immediately all contaminated clothing. Rinse SKIN with water/shower. |
COMPUTED DESCRIPTORS
| Molecular Weight | 104.15 g/mol |
|---|---|
| XLogP3 | 2.9 |
| Hydrogen Bond Donor Count | 0 |
| Hydrogen Bond Acceptor Count | 0 |
| Rotatable Bond Count | 1 |
| Exact Mass | 104.062600255 g/mol |
| Monoisotopic Mass | 104.062600255 g/mol |
| Topological Polar Surface Area | 0 Ų |
| Heavy Atom Count | 8 |
| Formal Charge | 0 |
| Complexity | 68.1 |
| Isotope Atom Count | 0 |
| Defined Atom Stereocenter Count | 0 |
| Undefined Atom Stereocenter Count | 0 |
| Defined Bond Stereocenter Count | 0 |
| Undefined Bond Stereocenter Count | 0 |
| Covalently-Bonded Unit Count | 1 |
| Compound Is Canonicalized | Yes |
PRODUCT INTRODUCTION
description
Styrene is primarily a synthetic chemical. It is also known as vinylbenzene, ethenylbenzene, cinnamene, or phenylethylene. It's a colorless liquid that evaporates easily and has a sweet smell. It often contains other chemicals that give it a sharp, unpleasant smell. It dissolves in some liquids but doesn't dissolve easily in water. Billions of pounds are produced each year to make products such as rubber, plastic, insulation, fiberglass, pipes, automobile parts, food containers, and carpet backing. Most of these products contain styrene linked together in a long chain (polystyrene) as well as unlinked styrene. Low levels of styrene also occur naturally in a variety of foods such as fruits, vegetables, nuts, beverages, and meats.