1321-74-0
Product Name:
Divinylbenzene
Formula:
C10H10
Synonyms:
Diethenylbenzene;Divinylbenzene;DVB;DVB HP;Vinylstyrene
Inquiry
CHEMICAL AND PHYSICAL PROPERTIES
Physical Description | Divinyl benzene appears as a water-white to straw colored liquid. Slightly less dense than water and insoluble in water. Vapors may be toxic. Used in making rubber. |
---|---|
Color/Form | Pale, straw-colored liquid. |
Boiling Point | 383 °F at 760 mmHg (NTP, 1992) |
Melting Point | -125 °F (NTP, 1992) |
Flash Point | 143 °F (NTP, 1992) |
Solubility | less than 1 mg/mL at 64 °F (NTP, 1992) |
Density | 0.93 (NIOSH, 2023) - Less dense than water; will float |
Vapor Density | Relative vapor density (air = 1): 4.48 |
Vapor Pressure | 0.7 mmHg (NIOSH, 2023) |
LogP | log Kow = 3.8 /Estimated/ |
Autoignition Temperature | 500 °C |
Decomposition | When heated to decomposition it emits acrid smoke and irritating fumes |
Polymerization | Hazardous polymerization may occur. ... Usually contains inhibitors to prevent polymerization. Uninhibited monomer vapor may form polymer in vents and other confined spaces. |
Odor Threshold | As with other styrene monomers, the odor can be detected by humans at levels below dangerous concn, ie, 10-60 ppm. |
Kovats Retention Index | 1102 |
Other Experimental Properties | Commercial product contains all three isomers, but the m-isomer predominates. Usually contains an inhibitor to prevent polymerization. |
Chemical Classes | Plastics & Rubber -> Styrenes |
SAFETY INFORMATION
Signal word | Warning |
---|---|
Pictogram(s) |
Exclamation Mark Irritant GHS07 Environment GHS09 |
GHS Hazard Statements |
H315:Skin corrosion/irritation H319:Serious eye damage/eye irritation H411:Hazardous to the aquatic environment, long-term hazard |
Precautionary Statement Codes |
P264:Wash hands thoroughly after handling. P264:Wash skin thouroughly after handling. P273:Avoid release to the environment. P280:Wear protective gloves/protective clothing/eye protection/face protection. P302+P352:IF ON SKIN: wash with plenty of soap and water. P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continuerinsing. P332+P313:IF SKIN irritation occurs: Get medical advice/attention. |
COMPUTED DESCRIPTORS
Molecular Weight | 130.19 g/mol |
---|---|
XLogP3 | 3.5 |
Hydrogen Bond Donor Count | 0 |
Hydrogen Bond Acceptor Count | 0 |
Rotatable Bond Count | 2 |
Exact Mass | 130.078250319 g/mol |
Monoisotopic Mass | 130.078250319 g/mol |
Topological Polar Surface Area | 0 Ų |
Heavy Atom Count | 10 |
Formal Charge | 0 |
Complexity | 108 |
Isotope Atom Count | 0 |
Defined Atom Stereocenter Count | 0 |
Undefined Atom Stereocenter Count | 0 |
Defined Bond Stereocenter Count | 0 |
Undefined Bond Stereocenter Count | 0 |
Covalently-Bonded Unit Count | 1 |
Compound Is Canonicalized | Yes |
PRODUCT INTRODUCTION
description
Divinyl benzene appears as a water-white to straw colored liquid. Slightly less dense than water and insoluble in water. Vapors may be toxic. Used in making rubber.