Americium SDS
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifier
- Product name： Americium
- CAS： 7440-35-9
Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses： For R&D use only. Not for medicinal, household or other use.
- Uses advised against： none
Company Identification
- Company：Chemicalbook.in
- Address：5 vasavi Layout Basaveswara Nilayam Pragathi Nagar Hyderabad, India -500090
- Telephone：+91 9550333722
SECTION 2: Hazards identification
Classification of the substance or mixture
no data available
GHS label elements, including precautionary statements
- Signal word no data available
no data available
no data available
no data available
no data available
no data available
Other hazards which do not result in classification
no data available
SECTION 3: Composition/information on ingredients
Substance
- Chemical name: Americium
- Common names and synonyms: Americium
- CAS number: 7440-35-9
- EC number: 231-144-4
- Concentration: 100%
SECTION 4: First aid measures
Description of necessary first-aid measures
Move the victim into fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and consult a doctor immediately. Do not use mouth to mouth resuscitation if the victim ingested or inhaled the chemical.
Take off contaminated clothing immediately. Wash off with soap and plenty of water. Consult a doctor.
Rinse with pure water for at least 15 minutes. Consult a doctor.
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
Most important symptoms/effects, acute and delayed
no data available
Indication of immediate medical attention and special treatment needed, if necessary
Basic Treatment. Establish a patent airway (oropharyngeal or nasopharyngeal airway, if needed). Suction if necessary. Watch for signs of respiratory insufficiency and assist ventilations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 mL/min. Monitor for shock and treat if necessary. Anticipate seizures and treat if necessary. Perform routine emergency care for associated injuries. ... Perform routine basic life support care as necessary. Radioactives I, II, and III
SECTION 5: Firefighting measures
Suitable extinguishing media
Use dry chemical, carbon dioxide or alcohol-resistant foam.
Specific hazards arising from the chemical
no data available
Special protective actions for fire-fighters
Wear self-contained breathing apparatus for firefighting if necessary.
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people away from and upwind of spill/leak.
Environmental precautions
Prevent further spillage or leakage if it is safe to do so. Do not let the chemical enter drains. Discharge into the environment must be avoided.
Methods and materials for containment and cleaning up
Decontamination is most successful when the material can be recycled for use in a nuclear facility since the need to prove releasability (cleanliness) is eliminated. Nevertheless, cleaning material for unrestricted release is also possible in some cases. It may also be possible to decontaminate an item enough to change its classification from TRU/transuranic/ waste to LLW /low-level waste/, thereby allowing immediate disposal of the item, while a relatively small quantity of decontamination waste is stored as TRU waste. Electropolishing to remove the thinnest metal surface has been very effective and produces a relatively small waste volume, especially when one of the wetted sponge units is used rather than an emersion tank. Surface scabbling has been used in decontamination of concrete, and various abrasive blasting methods have also been effective. Strippable and self-stripping coatings may be used to decontaminate surfaces, even though the primary application of strippable coatings has been in preventing contamination of surfaces. Plutonium facilities
SECTION 7: Handling and storage
Precautions for safe handling
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
SECTION 8: Exposure controls/personal protection
Control parameters
no data available
no data available
Appropriate engineering controls
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Individual protection measures, such as personal protective equipment (PPE)
Wear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).
Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.
no data available
SECTION 9: Physical and chemical properties and safety characteristics
-
Physical state：
no data available
-
Colour：
Silvery metal /Zero valence americium/
-
Odour：
no data available
-
Melting point/freezing point：
1175°C
-
Boiling point or initial boiling point and boiling range：
2,067 deg C /Americium metal/
-
Flammability：
no data available
-
Lower and upper explosion limit/flammability limit：
no data available
-
Flash point：
no data available
-
Auto-ignition temperature：
no data available
-
Decomposition temperature：
no data available
-
pH：
no data available
-
Kinematic viscosity：
no data available
-
Solubility：
Dissolves readily in aq HCl; insoluble in liquid ammonia. /Americium metal/
-
Partition coefficient n-octanol/water：
no data available
-
Vapour pressure：
no data available
-
Density and/or relative density：
13.671/Americium metal/
-
Relative vapour density：
no data available
-
Particle characteristics：
no data available
SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Am3+ ion /is/ stable; difficult to oxidize. from table
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
no data available
Hazardous decomposition products
no data available
SECTION 11: Toxicological information
Acute toxicity
- Oral: no data available
- Inhalation: no data available
- Dermal: no data available
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
There is sufficient evidence in experimental animals for the carcinogenicity of mixed alpha-particle emitters (radium-224, radium-226, thorium-227, thorium-228, thorium-230, thorium-232, neptunium-237, plutonium-238, plutonium-239 (together with plutonium- 240), americium-241, curium-244, californium-249 and californium-252). Radium, Plutonium, Americium, Curium, Californium
Reproductive toxicity
no data available
STOT-single exposure
no data available
STOT-repeated exposure
no data available
Aspiration hazard
no data available
SECTION 12: Ecological information
Toxicity
- Toxicity to fish: no data available
- Toxicity to daphnia and other aquatic invertebrates: no data available
- Toxicity to algae: no data available
- Toxicity to microorganisms: no data available
Persistence and degradability
no data available
Bioaccumulative potential
Fish may take up americium, but little builds up in the fleshy tissue(1). BCF values for americium-241 measured for various fish at the Department of Energy's Savannah River Site, SC were reported in 1996 as follows: largemouth bass (muscle), 2,500; bullhead catfish (bone), 4,200. In a study performed at a nuclear waste pond at Hanford, WA, the maximum concentration of actinides, including americium-241, that would accumulate in the whole fish and fish fillet were measured. In this waste pond, the sediment concentration of americium-241 was about 5.5 Bq/g, approximately 3 orders of magnitude above background levels. Both the bluegill and largemouth bass were studied. The concentration of americium-241 in the water was about 7 uBq/mL. The results from the Hanford study indicate that both short- and long-term uptakes of americium were low; that uptake was similar for short-term (5 days) and long-term (430 days) experiments; and that direct sediment-to-fish transfer was the primary route for americium uptake. In both species of fish, there were only a few cases where fillet concentrations were >10 times those in controls. The maximum concentration of americium-241 obtained in bass and bluegill were 1.1 and 1.0 mBq/mL dry weight in fillet and 2.5 and 74 mBq/mL in whole fish(1).
Mobility in soil
Americium has been shown to be largely associated with the high molecular weight organic factions of dissolved organic matter in the soil solution of two grassland soils, a soddy podzolic soil and a peat soil, in the vicinity of the nuclear reactor at Chernobyl, Ukraine. The distribution coefficients for americium-241 in these soils were (soil type (depth), Kd in mL/g): soddy podzolic-sod layer (0 to 2 cm), 1,220; soddy podzolic-mineral layer (2 to 5 cm), 810; peat (0 to 2 cm), 2,760; and peat (2 to 5 cm), 4,550(1). While it was similarly shown that the concentration of americium-241 was 2 to 3 times higher in organic matter than in whole sediment from Lake Michigan, organic matter was a very minor constituent of the sediment (<0.5%), so organic matter was associated with a smaller percentage of americium despite its higher concentration. The bulk of the americium-241 in Lake Michigan was found in the hydrous oxides fraction of both the sediment core samples and the suspended particulate matter(1).
Other adverse effects
no data available
SECTION 13: Disposal considerations
Disposal methods
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
SECTION 14: Transport information
UN Number
ADR/RID: no data available
IMDG: no data available
IATA: no data available
UN Proper Shipping Name
ADR/RID: no data available
IMDG: no data available
IATA: no data available
Transport hazard class(es)
ADR/RID: no data available
IMDG: no data available
IATA: no data available
Packing group, if applicable
ADR/RID: no data available
IMDG: no data available
IATA: no data available
Environmental hazards
ADR/RID: No
IMDG: No
IATA: No
Special precautions for user
no data available
Transport in bulk according to IMO instruments
no data available
SECTION 15: Regulatory information
Safety, health and environmental regulations specific for the product in question
SECTION 16: Other information
Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/