Not classified.
none
none
none
none
none
no data available
Move the victim into fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and consult a doctor immediately. Do not use mouth to mouth resuscitation if the victim ingested or inhaled the chemical.
Take off contaminated clothing immediately. Wash off with soap and plenty of water. Consult a doctor.
Rinse with pure water for at least 15 minutes. Consult a doctor.
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
no data available
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR if necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on the left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Poisons A and B
Use dry chemical, carbon dioxide or alcohol-resistant foam.
no data available
Wear self-contained breathing apparatus for firefighting if necessary.
Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people away from and upwind of spill/leak.
Prevent further spillage or leakage if it is safe to do so. Do not let the chemical enter drains. Discharge into the environment must be avoided.
Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations.
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
no data available
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).
Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.
no data available
Liquid.
Clear, yellowish.
Odorless
-18 °C. Atm. press.:Ca. 1 013 hPa. Remarks:Cloud point.
237 °C. Atm. press.:18 238.5 hPa. Remarks:18 atm.
no data available
no data available
253 °C. Atm. press.:Ca. 1 013 hPa.
no data available
no data available
no data available
kinematic viscosity (in mm2/s) = 85 - 95. Temperature:20°C.;kinematic viscosity (in mm2/s) = 42. Temperature:40°C.
Insoluble in water
log Pow = 23.
< 0 Pa. Temperature:20 °C. Remarks:3.55 E-023 Pa.
0.919. Temperature:15 °C.
no data available
no data available
no data available
no data available
no data available
no data available
Triolein (major skin lipid) was irradiated with 300-nm ultraviolet (UV) light, and the conditions for exposure approximated those at the skin surface exposed to sunlight. Using gas chromatography, the irradiated samples were analyzed for the presence of acrolein, formaldehyde, and acetaldehyde. The maximum amount of acrolein (1.05 nmol/mg Triolein) was formed after 6 hours of irradiation. Maximum amounts of formaldehyde (6 nmol/mg Triolein) and acetaldehyde (2.71 nmol/mg Triolein) were formed after 12 hours of irradiation.
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
AEROBIC: C14-labeled triolein, added at 100 mg/kg of soil, resulted in 63.5% of theoretical CO2 evolution in 151 days using a sewage sludge amended soil inoculum at 5g dry weight and 60% maximum water holding capacity(1). At a concentration of 750 mg/kg of soil, C14-labeled triolein resulted in 84% of theoretical CO2 in 146 days(1). In respirometry tests using a master culture inoculum developed from activated sludge from a local municipal wastewater treatment plant and 30-day incubation period, triolein had a biodegradation rate constant of 0.0025 per hour(2) which corresponds to a half-life of 11.6 days(SRC).
An estimated BCF of 3 was calculated in fish for triolein(SRC), using an estimated log Kow of 23.3(1) and a regression-derived equation(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).
Using a structure estimation method based on molecular connectivity indices(1), the Koc for triolein can be estimated to be 1X10+10(SRC). According to a classification scheme(2), this estimated Koc value suggests that triolein is expected to be immobile in soil.
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available