Skin corrosion, Sub-category 1B
H314 Causes severe skin burns and eye damage
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P316 Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
no data available
Fresh air, rest. Half-upright position. Refer for medical attention.
Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention .
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth. Do NOT induce vomiting. Give one or two glasses of water to drink. Refer for medical attention .
Liquid causes skin and eye burns. Vapors may irritate eeyes, nose, and throat, but should not cause systemic illness. (USCG, 1999)
Basic treatment: Establish a patent airway. Suction if necessary. Watch for signs of respiratory insufficiency and assist respirations if necessary. Administer oxygen by nonrebreather mask at 10 to 15 L/min. Monitor for pulmonary edema and treat if necessary ... Monitor for shock and treat if necessary ... For eye contamination, flush eyes immediately with water. Irrigate each eye continuously with normal saline during transport ... Do not use emetics. For ingestion, rinse mouth and administer 5 ml/kg up to 200 ml of water for dilution if the patient can swallow, has a strong gag reflex, and does not drool. Activated charcoal is not effective ... Do not attempt to neutralize because of exothermic reaction. Cover skin bumps with dry, sterile dressings after decontamination ... Organic acids and related compounds
Use water spray, dry chemical, "alcohol resistant" foam, or carbon dioxide. Use water spray to keep fire-exposed containers cool.
Excerpt from ERG Guide 132 [Flammable Liquids - Corrosive]: Flammable/combustible material. May be ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. (ERG, 2016)
Use water spray, powder, alcohol-resistant foam, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.
Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Do NOT let this chemical enter the environment. Personal protection: chemical protection suit including self-contained breathing apparatus.
Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Do NOT let this chemical enter the environment. Personal protection: chemical protection suit including self-contained breathing apparatus.
Use water spray to cool and disperse vapors, protect personnel, and dilute spills to form nonflammable mixtures. Control runoff and isolate discharged material for proper disposal.
NO open flames, NO sparks and NO smoking. Above 54°C use a closed system, ventilation and explosion-proof electrical equipment. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Fireproof. Separated from strong oxidants, strong bases and food and feedstuffs.Outside or detached storage is preferred. Store in a cool, dry, well-ventilated location.
TLV: 10 ppm as TWA.MAK: 31 mg/m3, 10 ppm; peak limitation category: I(2); pregnancy risk group: C.EU-OEL: 31 mg/m3, 10 ppm as TWA; 62 mg/m3, 20 ppm as STEL
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear face shield.
Protective gloves. Protective clothing.
Use ventilation, local exhaust or breathing protection.
no data available
Liquid.
Clear, colorless.
Slightly pungent disagreeable, rancid odor
-21.5 °C.
140.7 - 141.4 °C. Atm. press.:1 013 hPa.
Class II Combustible Liquid: Fl.P. at or above 100°F and below 140°F.
Lower flammable limit: 2.9% by volume; Upper flammable limit: 12.1% by volume
53 °C. Atm. press.:1 013.25 hPa.
440 °C. Atm. press.:1 013 hPa.
no data available
no data available
dynamic viscosity (in mPa s) = 1.102. Temperature:20°C. Remarks:Staudinger; Bauer.;dynamic viscosity (in mPa s) = 0.84. Temperature:20°C. Remarks:Kohler, Friedrich; Atrops, H.; Kalali, H.; Liebermann, E.; Wilhelm, Emmerich; et al.
Miscible with water
log Pow = 0.33. Remarks:No experimental values for the temperature and pH are available.
3.9 hPa. Temperature:20 °C.
0.99 g/cm3. Temperature:20 °C.
2.55 (vs air)
no data available
The substance is a medium strong acid. Reacts with bases, strong oxidants and amines. This generates fire and explosion hazard. Attacks many metals. This produces flammable/explosive gas (hydrogen - see ICSC 0001).
no data available
Flammable liquid. Highly flammable when exposed to heat, flame, or oxidizers.PROPIONIC ACID is a colorless, oily liquid, moderately toxic, corrosive. Flammable when exposed to heat, flame or oxidizers. When heated to decomposition it emits acrid smoke and irritating fumes [Lewis, 3rd ed., 1993, p. 1090].
no data available
Alkalis, strong oxidizers (e.g., chromium trioxide) [Note: Corrosive to steel].
When heated to decomposition it emits acrid smoke and irritating fumes.
no data available
no data available
no data available
no data available
no data available
no data available
The substance is corrosive to the eyes, skin and respiratory tract.
no data available
A harmful contamination of the air can be reached rather quickly on evaporation of this substance at 20°C.
AEROBIC: a number of aerobic biological screening studies, which utilized settled waste water, sewage, or activated sludge for inocula, have demonstrated that propionic acid is readily biodegradable(1-14). For example, 5 day theoretical BOD's of 23-55%(6), 37%(15), 40%(9) and 71%(2) have been reported. These studies indicate propionic acid should degrade rapidly under most environmental conditions.
An estimated BCF of 3.2 was calculated for propionic acid(SRC), using a log Kow of 0.33(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low.
The Koc of propionic acid is estimated as 36(SRC), using a log Kow of 0.33(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that propionic acid is expected to have very high mobility in soil. The pKa of propionic acid is 4.87(4), indicating that this compound will primarily exist in anion form in the environment and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(5).
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: UN1848 (For reference only, please check.)
IMDG: UN1848 (For reference only, please check.)
IATA: UN1848 (For reference only, please check.)
ADR/RID: PROPIONIC ACID with not less than 10% and less than 90% acid by mass (For reference only, please check.)
IMDG: PROPIONIC ACID with not less than 10% and less than 90% acid by mass (For reference only, please check.)
IATA: PROPIONIC ACID with not less than 10% and less than 90% acid by mass (For reference only, please check.)
ADR/RID: 8 (For reference only, please check.)
IMDG: 8 (For reference only, please check.)
IATA: 8 (For reference only, please check.)
ADR/RID: III (For reference only, please check.)
IMDG: III (For reference only, please check.)
IATA: III (For reference only, please check.)
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available