Acute toxicity - Category 3, Oral
Acute toxicity - Category 3, Dermal
Acute toxicity - Category 3, Inhalation
Hazardous to the aquatic environment, short-term (Acute) - Category Acute 1
Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 1
H301 Toxic if swallowed
H311 Toxic in contact with skin
H331 Toxic if inhaled
H410 Very toxic to aquatic life with long lasting effects
P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P273 Avoid release to the environment.
P301+P316 IF SWALLOWED: Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P330 Rinse mouth.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P316 Get emergency medical help immediately.
P361+P364 Take off immediately all contaminated clothing and wash it before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P391 Collect spillage.
P405 Store locked up.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
no data available
Fresh air, rest. Artificial respiration may be needed. Refer for medical attention. Half-upright position.
Remove contaminated clothes. Rinse and then wash skin with water and soap. Refer for medical attention .
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth. Give a slurry of activated charcoal in water to drink. Induce vomiting (ONLY IN CONSCIOUS PERSONS!). Give one or two glasses of water to drink. Refer for medical attention .
Metabolized by body to cyanide and thiocyanate; effects of inhalation of toxic fumes will be related to cyanide. Causes brain and heart damage related to lack of cellular oxygen. It is classified as extremely toxic. Probable oral lethal dose for humans is 5-50 mg/kg, or between 7 drops and 1 teaspoonful, for a 70 kg (150 lb.) person. (EPA, 1998)
Rapid support of respiration and circulation is essential to successful treatment of cyanide intoxication. Massive cyanide overdoses have survived with only good supportive care. Immediate attention should be directed toward assisted ventilation, administration of 100% oxygen, insertion of intravenous lines, and institution of cardiac monitoring. Obtain an arterial blood gas immediately and correct any severe metabolic acidosis (pH below 7.15). Oxygen (100%) should be used routinely in moderate or severely symptomatic patients even in the presence of a normal pO2, since 100% O2 increases O2 delivery, may reactivate cyanide-inhibited mitochondrial enzymes, and potentiates the effect of thiosulfate. Avoid mouth to mouth resuscitation during CPR in order to prevent self poisoning. Cyanides
To fight fire, use water, fog, spray, foam.
When heated to decomposition, malononitrile emits highly toxic fumes (cyanide). May polymerize violently on prolonged heating. Avoid heat. Hazardous polymerization may occur, at prolonged heating at 266F or contact with strong bases at lower temperatures. (EPA, 1998)
Use water spray, dry powder, foam, carbon dioxide.
Remove all ignition sources. Personal protection: chemical protection suit including self-contained breathing apparatus. Do NOT let this chemical enter the environment. Vacuum spilled material with specialist equipment. If appropriate, moisten first to prevent dusting.
Remove all ignition sources. Personal protection: chemical protection suit including self-contained breathing apparatus. Do NOT let this chemical enter the environment. Vacuum spilled material with specialist equipment. If appropriate, moisten first to prevent dusting.
Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations.
NO open flames. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Cool. Separated from strong bases and food and feedstuffs. Well closed. Keep in a well-ventilated room.
Component | Malononitrile | |||
---|---|---|---|---|
CAS No. | 109-77-3 | |||
Limit value - Eight hours | Limit value - Short term | |||
ppm | mg/m3 | ppm | mg/m3 | |
USA - NIOSH | 3 | 8 | ? | ? |
Remarks |
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear safety goggles or eye protection in combination with breathing protection.
Protective clothing. Protective gloves.
Use local exhaust or breathing protection.
no data available
Malononitrile is a white-colored crystalline solid. Denser than water and soluble in water. Toxic by ingestion and may severely irritate skin and eyes. May polymerize violently if exposed to temperatures above 266°F. Used to make other chemicals.
Colorless solid
no data available
30-34°C
220°C
Combustible Solid
no data available
112°C
no data available
no data available
no data available
no data available
greater than or equal to 100 mg/mL at 72.5° F (NTP, 1992)
log Kow = -0.60
0.125mmHg at 25°C
1.049
(air = 1): 2.3
no data available
The substance polymerizes under the influence of temperatures above 130°C or under the influence of bases. This generates fire or explosion hazard. Decomposes on heating. This produces toxic and corrosive gases including hydrogen cyanide and nitrogen oxides. Attacks many metals. This produces flammable/explosive gas (hydrogen - see ICSC 0001).
The stability of the molten nitrile decreases with increasing temperature and decreasing purity, but no violent decomposition at below 100 deg C has been recorded.
Combustible when exposed to heat or flame.MALONONITRILE is a white, low-melting powder (m. p. 30.5° C), toxic, combustible. Violent polymerization on contact with strong bases (sodium hydroxide, potassium hydroxide) or when heated above 130° C. When stored at 70-80° C for 2 months, spontaneous explosion (decomposition) occurred [Bretherick, 5th ed., 1995, p. 394].
no data available
Strong bases [Note: May polymerize violently on prolonged heating at 265 degrees F, or in contact with strong bases at lower temperatures].
When heated to decomposition it emits toxic fumes of NOx and CN- /nitrogen oxides and cyanides/.
no data available
no data available
no data available
no data available
no data available
no data available
The substance is severely irritating to the eyes, skin and respiratory tract. The substance may cause effects on the cellular respiration (inhibition). This may result in convulsions, cardiac disorders and respiratory failure. Exposure at high levels could cause death. Medical observation is indicated. The effects may be delayed.
no data available
A harmful contamination of the air will be reached rather slowly on evaporation of this substance at 20°C.
AEROBIC: Nitriles are biodegraded by enzyme-catalyzed hydrolysis to ultimately form carboxylic acids and ammonia(1,2). Thus, malononitrile may biodegrade in the environment(SRC).
An estimated BCF of 3 was calculated for malononitrile(SRC), using a log Kow of -0.60(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).
The Koc of malononitrile is estimated as 11(SRC), using a measured log Kow of -0.60(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that malononitrile is expected to have very high mobility in soil(SRC).
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: UN2647 (For reference only, please check.)
IMDG: UN2647 (For reference only, please check.)
IATA: UN2647 (For reference only, please check.)
ADR/RID: MALONONITRILE (For reference only, please check.)
IMDG: MALONONITRILE (For reference only, please check.)
IATA: MALONONITRILE (For reference only, please check.)
ADR/RID: 6.1 (For reference only, please check.)
IMDG: 6.1 (For reference only, please check.)
IATA: 6.1 (For reference only, please check.)
ADR/RID: II (For reference only, please check.)
IMDG: II (For reference only, please check.)
IATA: II (For reference only, please check.)
ADR/RID: Yes
IMDG: Yes
IATA: Yes
no data available
no data available
Depending on the degree of exposure, periodic medical examination is suggested.Specific treatment is necessary in case of poisoning with this substance; the appropriate means with instructions must be available.