Reproductive toxicity, Additional category for effects on or via lactation
Reproductive toxicity, Category 1A
H362 May cause harm to breast-fed children
P203 Obtain, read and follow all safety instructions before use.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P263 Avoid contact during pregnancy and while nursing.
P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P318 IF exposed or concerned, get medical advice.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
no data available
Fresh air, rest.
Remove contaminated clothes. Rinse and then wash skin with water and soap.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth. Give one or two glasses of water to drink. Refer for medical attention .
Exposure Routes: inhalation, ingestion, skin and/or eye contact Symptoms: Lassitude (weakness, exhaustion), insomnia; facial pallor; anorexia, weight loss, malnutrition; constipation, abdominal pain, colic; anemia; gingival lead line; tremor; paralysis wrist, ankles; encephalopathy; kidney disease; irritation eyes; hypotension Target Organs: Eyes, gastrointestinal tract, central nervous system, kidneys, blood, gingival tissue (NIOSH, 2016)
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR if necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Lead and related compounds
Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Flash point data for this compound are not available, however, it is probably non-combustible. (NTP, 1992)
In case of fire in the surroundings, use appropriate extinguishing media.
Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Do NOT let this chemical enter the environment. Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting. Carefully collect remainder. Then store and dispose of according to local regulations.
Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Do NOT let this chemical enter the environment. Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting. Carefully collect remainder. Then store and dispose of according to local regulations.
ACCIDENTAL RELEASE MEASURES: Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust; Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided; Methods and materials for containment and cleaning up: Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.
Closed system, ventilation, explosion-proof electrical equipment and lighting. Prevent deposition of dust. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Separated from food and feedstuffs and incompatible materials. See Chemical Dangers.Keep container tightly closed in a dry and well-ventilated place. Keep in a dry place.
TLV: 0.05 mg/m3, as TWA; A3 (confirmed animal carcinogen with unknown relevance to humans); BEI issued.MAK: carcinogen category: 2; germ cell mutagen group: 3A.EU-OEL: (binding): 0.15 mg/m3 as TWA
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear safety spectacles.
Protective gloves.
Use local exhaust or breathing protection.
no data available
Solid. Powder.
Yellow.
None
> 600 °C. Atm. press.:Ca. 1 013 mBar. Remarks:The test item has no melting point at atmospheric pressure up to the final temperature of 600 °C.
> 600 °C. Atm. press.:Ca. 1 013 mBar. Remarks:The test item has no boiling point at atmospheric pressure up to the final temperature of 600 °C.
Noncombustible Solid in bulk form.
no data available
no data available
no data available
no data available
no data available
Viscosity of molten lead: 3.2 cP at 327.4 deg C; 2.32 cP at 400 deg C; 1.54 cP at 600 deg C; 1.23 cP at 800 deg C
Insoluble (NTP, 1992)
no data available
1.77 mm Hg (NTP, 1992)
9.96. Temperature:22.5 °C.
no data available
no data available
Decomposes on heating. This produces toxic fumes. Reacts with oxidants. Reacts with hot concentrated nitric acid, boiling concentrated hydrochloric acid and sulfuric acid. Attacked by pure water and by weak organic acids in the presence of oxygen.
Stable under recommended storage conditions.
Noncombustible.Dust explosion possible if in powder or granular form, mixed with air.In the presence of carbon, the combination of chlorine trifluoride with aluminum, copper, lead, magnesium, silver, tin, or zinc results in a violent reaction [Mellor 2, Supp. 1: 1956]. A solution of sodium azide in copper pipe with lead joints formed copper and lead azide, both are detonating compounds [Klotz 1973]. Sodium acetylide becomes pyrophoric when mixed with metals like lead. Mixtures of trioxane with 60% hydrogen peroxide in contact with metallic lead when heated detonated. Lead containing rubber ignited in a nitric acid atmosphere. Lead is incompatible with strong oxidants such as: ammonium nitrate, chlorine trifluoride, hydrogen peroxide, etc.
no data available
Incompatible materials: Strong acids
When heated to decomposition it emits highly toxic fumes of /lead/.
no data available
no data available
no data available
no data available
EPA: Probable human carcinogen. IARC: Inorganic lead - probably carcinogenic to humans. NTP: Reasonably anticipated to be a human carcinogen
no data available
no data available
The substance may have effects on the blood, bone marrow, central nervous system, peripheral nervous system and kidneys. This may result in anaemia, encephalopathy (for example, convulsions), peripheral nerve disease, abdominal cramps and kidney impairment. Causes toxicity to human reproduction or development.
A harmful concentration of airborne particles can be reached quickly when dispersed, especially if powdered.
Elemental lead is not biodegradable.
no data available
no data available
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
ADR/RID: Yes
IMDG: Yes
IATA: Yes
no data available
no data available
Depending on the degree of exposure, periodic medical examination is suggested.Do NOT take working clothes home.