Pyrophoric solids, Category 1
H250 Catches fire spontaneously if exposed to air
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P222 Do not allow contact with air.
P233 Keep container tightly closed.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P302+P335+P334 IF ON SKIN: Brush off loose particles from skin. Immerse in cool water [or wrap in wet bandages].
P370+P378 In case of fire: Use ... to extinguish.
none
none
no data available
Fresh air, rest.
Rinse contaminated clothes (fire hazard) with plenty of water. Remove contaminated clothes. Rinse and then wash skin with water and soap.
Rinse with plenty of water (remove contact lenses if easily possible).
Rinse mouth.
Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]: Fire will produce irritating, corrosive and/or toxic gases. Inhalation of decomposition products may cause severe injury or death. Contact with substance may cause severe burns to skin and eyes. Runoff from fire control may cause pollution. (ERG, 2016)
Hafnium can be absorbed into the body by inhalation of its aerosol.
If material on fire or involved in fire: Use suitable dry powder. ... Use dry chemical or carbon dioxide. ... Use water only if flooding quantities are available. Hafnium powder, dry
Excerpt from ERG Guide 135 [Substances - Spontaneously Combustible]: Flammable/combustible material. May ignite on contact with moist air or moisture. May burn rapidly with flare-burning effect. Some react vigorously or explosively on contact with water. Some may decompose explosively when heated or involved in a fire. May re-ignite after fire is extinguished. Runoff may create fire or explosion hazard. Containers may explode when heated. (ERG, 2016)
Use special powder, dry sand, water in large amounts.
Remove all ignition sources. Evacuate danger area! Consult an expert! Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Wet powder to prevent dusting and ignition. Sweep spilled substance into covered water-filled containers. Then store and dispose of according to local regulations. Do NOT wash away into sewer. Do NOT absorb in saw-dust or other combustible absorbents.
Remove all ignition sources. Evacuate danger area! Consult an expert! Personal protection: particulate filter respirator adapted to the airborne concentration of the substance. Wet powder to prevent dusting and ignition. Sweep spilled substance into covered water-filled containers. Then store and dispose of according to local regulations. Do NOT wash away into sewer. Do NOT absorb in saw-dust or other combustible absorbents.
Persons not wearing protective equipment and clothing should be restricted from areas of spills until cleanup has been completed. 1. Ventilate area of spill. 2. Collect spilled material in most convenient and safe manner and deposit in sealed containers for reclamation, or for disposal in secured sanitary landfill. Liq containing hafnium...should be absorbed in vermiculite, dry sand, earth, or similar material.
NO open flames, NO sparks and NO smoking. Do NOT expose to friction or shock. Closed system, dust explosion-proof electrical equipment and lighting. Prevent deposition of dust. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Fireproof. Separated from strong oxidants, strong acids and halogens. Keep under inert gas. Store only in original container.Storage: Store hafnium in a fireproof area. Keep it separate from strong oxidizing agents, strong bases, halogens, phosphorus, and sulfur. Keep stored under water.
TLV: 0.5 mg/m3, as TWA
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear safety spectacles.
Protective gloves.
Avoid inhalation of dust. Use closed system.
no data available
Hafnium powder, dry, is a grayish metallic colored powder. Dust from dry powder may be ignited by static electricity. The dry powder reacts with moisture to produce hydrogen, a flammable gas. The heat from this reaction may be sufficient to ignite the hydrogen. It does not appreciably react with large quantities of water.
Gray crystals
no data available
2227°C(lit.)
4602°C(lit.)
Explosive in powder form (either dry or with <25% water); finely divided powder can be ignited by static electricity or even SPONTANEOUSLY.
no data available
no data available
20 deg C for dust cloud
no data available
no data available
no data available
Insoluble (NIOSH, 2016)
no data available
0 mm Hg (approx) (NIOSH, 2016)
13.3g/cm3(lit.)
no data available
no data available
Recommended Exposure Limit: 50 mg/cu m (as Hf)
The substance may ignite spontaneously on contact with air. May decompose on shock, friction or concussion. May explode on heating. Reacts violently with halogens, strong acids and strong oxidants. This generates explosion hazard.
no data available
The substance may spontaneously ignite on contact with air and at higher temperatures with nitrogen, phosphorous and sulphur. /Hafnium powder, wet or dry/Dust explosion possible if in powder or granular form, mixed with air.Metals, such as HAFNIUM METAL(reactivity similar to zirconium), are reducing agents and tend to react with oxidizing agents. Their reactivity is strongly influenced by their state of subdivision: in bulk they often resist chemical combination; in powdered form they may react very rapidly. Thus, as a bulk metal it is somewhat unreactive, but finely divided material may be pyrophoric. The metal reacts exothermically with compounds having active hydrogen atoms (such as acids and water) to form flammable hydrogen gas and caustic products. The reactions are less vigorous than the similar reactions of alkali metals, but the released heat can still ignite the released hydrogen. Materials in this group may react with azo/diazo compounds to form explosive products. These metals and the products of their corrosion by air and water can catalyze polymerization reactions in several classes of organic compounds; these polymerizations sometimes proceed rapidly or even explosively. Some metals in this group form explosive products with halogenated hydrocarbons.
no data available
Although /hafnium/ is relatively inert, when powdered it becomes very reactive. The dry powder may react explosively at elevated temperatures with nitrogen, phosphorus, oxygen, sulfur and other non-metals. The halogens react similarly, and in contact with hot concentrated nitric acid and other oxidants it may explode (often after a delay with nitric acid). The powder is pyrophoric and readily ignitable by friction, heat or static sparks, and if dry burns fiercely. Presence of water (5-10%) slightly reduces the ease of ignition, but combustion of the damp powder proceeds explosively (the oxygen content of water, 89%, being much higher than that of air).
May explosively decompose on shock, friction, or concussion. Hafnium powder
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: UN2545 (For reference only, please check.)
IMDG: UN2545 (For reference only, please check.)
IATA: UN2545 (For reference only, please check.)
ADR/RID: HAFNIUM POWDER, DRY (For reference only, please check.)
IMDG: HAFNIUM POWDER, DRY (For reference only, please check.)
IATA: HAFNIUM POWDER, DRY (For reference only, please check.)
ADR/RID: 4.2 (For reference only, please check.)
IMDG: 4.2 (For reference only, please check.)
IATA: 4.2 (For reference only, please check.)
ADR/RID: I (For reference only, please check.)
IMDG: I (For reference only, please check.)
IATA: I (For reference only, please check.)
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available
Insufficient data are available on the effect of this substance on human health, therefore utmost care must be taken.Powder is normally handled wetted with no less than 25% of water to reduce the fire and explosion risk. UN number 2545 is for dry powder, according to the specification of the powder Packing Group can be either I, II, or III. The GHS classification will also vary according to the specification of the powder. Other UN number is: 1326 HAFNIUM POWDER, WETTED with not less than 25% water; class 4.1; packing group: II.