Skin corrosion, Sub-category 1B
Serious eye damage, Category 1
Acute toxicity - Category 4, Inhalation
H314 Causes severe skin burns and eye damage
H318 Causes serious eye damage
H332 Harmful if inhaled
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P316 Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P305+P354+P338 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P317 Get medical help.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
no data available
Half-upright position. Fresh air, rest. Refer for medical attention.
First rinse with plenty of water for at least 15 minutes, then remove contaminated clothes and rinse again.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Do NOT induce vomiting. Give one or two glasses of water to drink. Refer for medical attention .
no data available
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Organic acids and related compounds
Suitable extinguishing media: Use water spray, alcohol - resistant foam, dry chemical or carbon dioxide.
Combustible.
Use water spray, powder, foam, carbon dioxide.
Personal protection: chemical protection suit including self-contained breathing apparatus. Sweep spilled substance into covered containers.
Personal protection: chemical protection suit including self-contained breathing apparatus. Sweep spilled substance into covered containers.
Accidental Release Measures. Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Environmental precautions: Do not let product enter drains. Methods and materials for containment and clean up: Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.
NO open flames. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Separated from strong oxidants, metals, sulfides, cyanides, strong bases and food and feedstuffs. Dry.Separated from strong oxidants, metals, sulfides, cyanides, strong bases and food and feedstuffs. Dry.
no data available
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear safety goggles or eye protection in combination with breathing protection.
Protective gloves.
Avoid inhalation of dust and mist.
no data available
Solid. Crystalline.
Colourless.
Odorless
78 - 80.5 °C.
169 °C. Atm. press.:998 hPa.
Combustible.
no data available
> 100 °C.
no data available
100°C
pH = 2.5 (0.5%); 2.33 (1.0%); 2.16 (2.0%); 1.91 (5.0%); 1.73 (10.0%)
kinematic viscosity (in mm2/s) = 6.149. Temperature:23.0°C. Remarks:Mean of two runs.
In water, 1X10+6 mg/L at 25 deg C (est)
log Pow = < 0.3. Temperature:25 °C.;log Pow = < 0.3. Temperature:25 °C.;log Pow = < 0.3. Temperature:25 °C.
0.41 Pa. Temperature:25 °C. Remarks:Mean value from four runs.
1.26 g/cm3. Temperature:20 °C.
(air = 1): 2.6
no data available
Reacts with strong oxidants, cyanides and sulfides. Reacts violently with aluminium, zinc and tin. This generates fire and explosion hazard. The solution in water is a medium strong acid.
Stable under recommended storage conditions.
Combustible.
no data available
Materials to avoid Bases, Oxidizing agents, Reducing agents
Hazardous decomposition products formed under fire conditions. - Carbon oxides
no data available
no data available
no data available
no data available
no data available
no data available
The substance is corrosive to the skin and eyes. The substance is irritating to the respiratory tract. Corrosive on ingestion. This may result in kidney failure.
Repeated or prolonged contact with skin may cause dermatitis.
A harmful concentration of airborne particles can be reached quickly on spraying or when dispersed, especially if powdered.
AEROBIC: Hydroxyacetic acid achieved 32% theoretical oxidation by acclimated activated sludge after 12 hours of aeration(1). The theoretical BOD for hydroxyacetic acid was reported to be 0.89 after 5 days using acclimated mixed microbial cultures(2). Hydroxyacetic acid, present at 100 mg/L, reached 86% of its theoretical BOD in 2 weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(3). Therefore this compound is expected to biodegrade rapidly in the environment(SRC).
An estimated BCF of 3 was calculated in fish for hydroxyacetic acid (SRC), using a measured log Kow of -1.11(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).
The Koc of hydroxyacetic acid is estimated as 0.14(SRC), using a measured log Kow of -1.11(1) and a regression-derived equation(2). According to a classification scheme(3), this estimated Koc value suggests that hydroxyacetic acid is expected to have very high mobility in soil. The pKa of hydroxyacetic acid is 3.6(4), indicating that this compound will exist almost entirely in the anion form and anions generally do not adsorb more strongly to soils containing organic carbon and clay than their neutral counterparts(5).
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: UN3261 (For reference only, please check.)
IMDG: UN3261 (For reference only, please check.)
IATA: UN3261 (For reference only, please check.)
ADR/RID: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.)
IMDG: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.)
IATA: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.)
ADR/RID: 8 (For reference only, please check.)
IMDG: 8 (For reference only, please check.)
IATA: 8 (For reference only, please check.)
ADR/RID: I (For reference only, please check.)
IMDG: I (For reference only, please check.)
IATA: I (For reference only, please check.)
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available
This substance is often available commercially as a 70% solution with UN number 3265, hazard class 8, packaging group II.