Skin irritation, Category 2
Eye irritation, Category 2
Specific target organ toxicity – single exposure, Category 3
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
no data available
Fresh air, rest. Refer for medical attention.
Refer for medical attention .
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Refer for medical attention .
no data available
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Esters and related compounds
Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Special protective equipment for fire-fighters: Wear self contained breathing apparatus for fire fighting if necessary.
Combustible. Above 75°C explosive vapour/air mixtures may be formed.
In case of fire in the surroundings, use appropriate extinguishing media. In case of fire: keep drums, etc., cool by spraying with water.
Ventilation. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
Ventilation. Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
Personal precautions: Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Environmental precautions: Do not let product enter drains. Methods and materials for containment and cleaning up: Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal.
NO open flames. Above 75°C use a closed system, ventilation and explosion-proof electrical equipment. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Cool.Keep container tightly closed in a dry and well-ventilated place. Recommended storage temperature: 2 - 8 deg C Product is sensitive to light and moisture.
TLV: 0.2 ppm as TWA; 1 ppm as STEL; (DSEN); (RSEN).MAK: 120 mg/m3, 20 ppm; peak limitation category: II(2); skin absorption (H); pregnancy risk group: C
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear safety goggles.
Protective gloves. Protective clothing.
Use ventilation.
no data available
Liquid
Clear, colorless, liquid
Strong , acrid odor
-20 to -25 deg C
55 deg C at 3 mm Hg
Combustible.
no data available
85°C
no data available
no data available
no data available
no data available
Soluble in methyl ethyl ketone, toluene, acetone, DMF /N,N-dimethylformamide/, nitromethane
no data available
0.31 mm Hg at 20 deg C
1.040 at 20 deg C
no data available
no data available
The substance rapidly polymerizes. Decomposes on heating and on burning. This produces toxic and irritating fumes and gases including nitrogen oxides and cyanides.
no data available
The substance rapidly polymerizes. Decomposes on heating and on burning. This produces toxic and irritating fumes and gases including nitrogen oxides and cyanides.
no data available
no data available
When heated to decomposition it emits vapors of /Nitrogen oxides/.
no data available
no data available
no data available
no data available
no data available
no data available
The substance is severely irritating to the eyes and skin.
Repeated or prolonged contact may cause skin sensitization.
No indication can be given about the rate at which a harmful concentration of this substance in the air is reached on evaporation at 20°C.
Ethyl cyanoacrylate polymerizes rapidly on contact with moisture(1,2). Therefore, biodegradation is not a relevant environmental fate process for this substance(SRC).
Ethyl cyanoacrylate polymerizes rapidly on contact with moisture(1,2). Therefore, bioconcentration in aquatic organisms is not a relevant environmental process for this substance(SRC).
Using a structure estimation method based on molecular connectivity indices(1), the Koc of ethyl cyanoacrylate can be estimated to be 6.8(SRC). According to a classification scheme(2), this estimated Koc value suggests that ethyl cyanoacrylate is expected to have very high mobility in soil. However, movement of ethyl cyanoacrylate through soil will be hindered by its rapid polymerization as it comes into contact with moisture or other weakly basic substances(3,4).
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
ADR/RID: Not dangerous goods. (For reference only, please check.)
IMDG: Not dangerous goods. (For reference only, please check.)
IATA: Not dangerous goods. (For reference only, please check.)
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available