Acute toxicity - Category 4, Oral
Acute toxicity - Category 4, Dermal
Skin corrosion, Sub-category 1B
Acute toxicity - Category 2, Inhalation
H302 Harmful if swallowed
H312 Harmful in contact with skin
H314 Causes severe skin burns and eye damage
H330 Fatal if inhaled
P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P284 [In case of inadequate ventilation] wear respiratory protection.
P301+P317 IF SWALLOWED: Get medical help.
P330 Rinse mouth.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P317 Get medical help.
P321 Specific treatment (see ... on this label).
P362+P364 Take off contaminated clothing and wash it before reuse.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P316 Get emergency medical help immediately.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P320 Specific treatment is urgent (see ... on this label).
P405 Store locked up.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
no data available
Move the victim into fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and consult a doctor immediately. Do not use mouth to mouth resuscitation if the victim ingested or inhaled the chemical.
Take off contaminated clothing immediately. Wash off with soap and plenty of water. Consult a doctor.
Rinse with pure water for at least 15 minutes. Consult a doctor.
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
no data available
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Esters and related compounds
Suitable Extinguishing Media: All extinguishing media are suitable. Special Fire Fighting Procedures: Firefighters should be equipped with self-contained breathing apparatus to protect against potentially toxic and irritating fumes. Use cold water spray to cool fire-exposed containers to minimize risk of rupture.
no data available
Wear self-contained breathing apparatus for firefighting if necessary.
Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people away from and upwind of spill/leak.
Prevent further spillage or leakage if it is safe to do so. Do not let the chemical enter drains. Discharge into the environment must be avoided.
Spill and Leak Procedures: Cleanup personnel must use appropriate personal protective equipment. Do not allow spilled material or wash water to enter sewers, surface waters, or groundwater systems. Remove all sources of ignition, including flames, heat, and sparks. Ventilate area to remove vapors or dust. Evacuate and keep unnecessary people out of spill area. Cover spill with damp, fluid-binding material (for example, sand, sawdust, chemical binder based on calcium silicate hydrate). Transfer to an open waste container after approximately one hour, cover loosely and remove to an isolated area. Do not seal the container as carbon dioxide given off by the slow reaction between Velcorin and water may cause a tightly sealed container to burst. Flush the spill with cold water but avoid flushing into open drains. Hot water should never be used for this purpose since it would cause considerable vaporization of the spilled material. Use the paper Velcorin indicator strips to insure that there is no residual Dimethyl Dicarbonate in the air.
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Storage Temperature: minimum: 20 deg C (68 deg F); maximum: 30 deg C (86 deg F). Storage Period: 12 Months: Keep in a dry place. Expiration date on label is day/month/year. Handling/Storage Precautions: Do not breathe vapors or spray mist. Do not get on skin or clothing. Do not get in eyes. Do not taste or swallow. Use only with adequate ventilation/personal protection. Wash thoroughly after handling. Keep container closed when not in use. Store in a dry place away from excessive heat in original or similar containers. Protect from freezing. Further Info on Storage Conditions: Avoid extreme heat. Product can react with water. Avoid contact with moisture/water. Light sensitive. If the material does crystallize, it must be reliquified before being used. The recommended method to reliquify is to simply place the container in an appropriate storage area and allow it to gradually reach ambient temperatures. An alternative is to reliquify by gently heating it in a water bath. Do NOT apply heat/flame directly to container.
no data available
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).
Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.
no data available
Colourless liquid, decomposes in aqueous solution. It is corrosive to skin and eyes and toxic by inhalation and ingestion
Clear, colorless liquid
no data available
15-17°C
45-46°C/5mmHg(lit.)
no data available
no data available
80°C
Approximately 465 deg C (869 deg F)
no data available
no data available
no data available
In water, 4.77X10+5 mg/L at 25 deg C (est)
log Kow = -0.86 (est)
1.46 mm Hg at 25 deg C (est)
1.25g/mLat 25°C(lit.)
no data available
no data available
no data available
no data available
Combustible
no data available
no data available
Hazardous decomposition products: By Fire and Thermal Decomposition: Methanol; Carbon oxides, nitrogen oxides (NOx), other potentially toxic fumes.
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
AEROBIC: While biodegradation data for dimethyl dicabonate were not available(SRC, 2013), dimethyl carbonate, a structural analog, was >90% biodegraded in 28 days using an activated sludge inoculum in the OECD 301C test (Modified MITI)(1).
An estimated BCF of 3.2 was calculated in fish for dimethyl dicarbonate(SRC), using an estimated log Kow of -0.86(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).
Using a structure estimation method based on molecular connectivity indices(1), the Koc of dimethyl dicarbonate can be estimated to be 1(SRC). According to a classification scheme(2), this estimated Koc value suggests that dimethyl dicarbonate is expected to have very high mobility in soil.
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: UN2927 (For reference only, please check.)
IMDG: UN2927 (For reference only, please check.)
IATA: UN2927 (For reference only, please check.)
ADR/RID: TOXIC LIQUID, CORROSIVE, ORGANIC, N.O.S. (For reference only, please check.)
IMDG: TOXIC LIQUID, CORROSIVE, ORGANIC, N.O.S. (For reference only, please check.)
IATA: TOXIC LIQUID, CORROSIVE, ORGANIC, N.O.S. (For reference only, please check.)
ADR/RID: 6.1 (For reference only, please check.)
IMDG: 6.1 (For reference only, please check.)
IATA: 6.1 (For reference only, please check.)
ADR/RID: I (For reference only, please check.)
IMDG: I (For reference only, please check.)
IATA: I (For reference only, please check.)
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available