Skin irritation, Category 2
Eye irritation, Category 2
Specific target organ toxicity – single exposure, Category 3
Reproductive toxicity, Category 2
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
H361 Suspected of damaging fertility or the unborn child
P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P203 Obtain, read and follow all safety instructions before use.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
P318 IF exposed or concerned, get medical advice.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
no data available
Fresh air, rest.
Rinse and then wash skin with water and soap.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth. Refer for medical attention .
Inhalation of vapors from very hot material may cause headache, drowsiness, and convulsions. Contact with eyes may cause irritation. (USCG, 1999)
no data available
Foam, dry chemical, carbon dioxide.
Combustible.
Use water spray, alcohol-resistant foam, dry powder, carbon dioxide.
Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations.
Removal of phthalate esters (PAEs) by alpha-cyclodextrin (CD)-linked chitosan bead in aqueous solution was studied. Results of kinetic experiments indicated that diheptyl phthalate (DHpP) was adsorbed most efficiently (3.21 mg/g) ... It was concluded that the application of low cost alpha-CD-linked chitosan bead could have the potential to effectively remove PAEs from different aquatic environments.
NO open flames. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
no data available
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear safety spectacles.
Protective gloves.
Use ventilation.
no data available
Diheptyl phthalate is an odorless white liquid. May float or sink in water. (USCG, 1999)
Colorless liquid
Practically odorless
no data available
396.9°C at 760mmHg
Combustible.
no data available
211.3°C
no data available
no data available
no data available
no data available
0.01% in water
log Kow = 7.56 (est)
2.07X10-6 mm Hg at 25 deg C (est)
0.997g/cm3
no data available
no data available
Decomposes on burning. This produces irritating fumes.
no data available
DIHEPTYL PHTHALATE is an ester. Esters react with acids to liberate heat along with alcohols and acids. Strong oxidizing acids may cause a vigorous reaction that is sufficiently exothermic to ignite the reaction products. Heat is also generated by the interaction of esters with caustic solutions. Flammable hydrogen is generated by mixing esters with alkali metals and hydrides. Can generate electrostatic charges. [Handling Chemicals Safely 1980. p. 250].
no data available
no data available
When heated to decomposition it emits acrid smoke and irritating fumes.
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
Evaporation at 20°C is negligible; a nuisance-causing concentration of airborne particles can, however, be reached quickly when dispersed.
AEROBIC: Diheptyl phthalate present at 100 mg/L, reached 36% of its theoretical BOD in two weeks using an activated sludge inoculum at 30 mg/L in the Japanese MITI test(1,4). Diheptyl phthalate, added to an aerobic semi-continuous activated sludge apparatus at 5, 10, and 20 mg/24 hr, underwent 52, 48, and 54% degradation, respectively(2-3). Di(heptyl,nonyl,undecyl) phthalate had a half-life of 6 to 8 days in river die-away tests(5). In active microcosms containing lake water and sediment, 40 to 48% of (14)C-di(heptyl,nonyl,undecyl) phthalate radioactivity was evolved as carbon dioxide over a 41 day period; after six weeks no residual (14)C-di(heptyl,nonyl,undecyl) phthalate was found in the water column and only 2 to 6% was associated with sediments(5). In semi-continuous activated sludge tests, a primary degradation half-life of <1 day at an addition rate of 5 to 200 mg/L per 24-hour cycle was observed for di(heptyl,nonyl,undecyl) phthalate(5). In shake flask studies using an acclimated bacterial inoculum, an ultimate degradation half-life of 5 days was observed for di(heptyl,nonyl,undecyl) phthalate at an initial concentration of 20 mg/L(5). Diheptyl phthalate was biodegraded in river water from the Kako River in Japan(6). Diheptyl phthalate was biodegraded 11-16% over a 40 day incubation period with activated sludge(7).
BCFs of 0.9 to 2.2 and 6.2 to 16.7 were measured for diheptyl phthalate in carp at chemical concentrations of 1 and 0.1 mg/L, respectively(1). According to a classification scheme(2), these measured BCFs suggest that bioconcentration in aquatic organisms is low(SRC).
Using a structure estimation method based on molecular connectivity indices(1), the Koc of diheptyl phthalate can be estimated to be 5.7X10+4(SRC). According to a classification scheme(2), this estimated Koc value suggests that diheptyl phthalate is expected to be immobile in soil. In sterile microcosms containing lake water and sediment, approximately 80% of di(heptyl,nonyl,undecyl) phthalate partitioned to sediment(3).
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: no data available
IMDG: no data available
IATA: no data available
ADR/RID: no data available
IMDG: no data available
IATA: no data available
ADR/RID: no data available
IMDG: no data available
IATA: no data available
ADR/RID: no data available
IMDG: no data available
IATA: no data available
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available
Insufficient data are available on the effect of this substance on human health, therefore utmost care must be taken.