Acute toxicity - Category 4, Oral
Skin corrosion, Sub-category 1B
Serious eye damage, Category 1
Acute toxicity - Category 4, Inhalation
H302 Harmful if swallowed
H314 Causes severe skin burns and eye damage
H332 Harmful if inhaled
P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P301+P317 IF SWALLOWED: Get medical help.
P330 Rinse mouth.
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P316 Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P305+P354+P338 IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P317 Get medical help.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
no data available
Move the victim into fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and consult a doctor immediately. Do not use mouth to mouth resuscitation if the victim ingested or inhaled the chemical.
Take off contaminated clothing immediately. Wash off with soap and plenty of water. Consult a doctor.
Rinse with pure water for at least 15 minutes. Consult a doctor.
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
Contact irritates eyes and may irritate skin. (USCG, 1999)
no data available
Water ... effective in controlling fire; however, resulting liquid ... extremely corrosive ...
Special Hazards of Combustion Products: Toxic oxides of nitrogen and toxic and flammable acetonitrile vapors may form in fire. (USCG, 1999)
Wear self-contained breathing apparatus for firefighting if necessary.
Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people away from and upwind of spill/leak.
Prevent further spillage or leakage if it is safe to do so. Do not let the chemical enter drains. Discharge into the environment must be avoided.
Stop or control the leak, if this can be done without undue risk. Absorb in noncombustible material for proper disposal.
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Protect against physical damage. Separate from other storage ... /Store/ away from any area where fire hazard may be acute. Outside or detached storage is preferred ...
no data available
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).
Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.
no data available
Solid. Crystalline.
White to light yellow.
no data available
66 °C
108 °C
no data available
no data available
107.78 °C
no data available
no data available
2. Remarks:Temperature and concentration not available.
no data available
Miscible with water
log Kow = -0.76
0.1 mm Hg ( 100 °C)
1.26 (20 °C)
no data available
no data available
no data available
no data available
Combustible solid. When heated to decomp, emits ... flammable acetonitrile vapor.White, moderately toxic solid, combustible. When heated to decomposition it emits toxic fumes of nitrile and oxides of nitrogen. A stirred mixture with furfuryl alcohol exploded violently upon heating [MCA Case History No 858].
no data available
An explosion occurred in a laboratory when cyanoacetic acid was reacted with furfuryl alcohol in an attempt to form the ester, furfuryl cyanoacetate. The explosion occurred a few min after the agitator was turned on and the heat applied. Furfuryl alcohol
Decomposes at 320 deg F (160 deg C) with release of acetonitrile.
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
AEROBIC: Cyanoacetic acid, present at 100 mg/L, reached 90% of its theoretical BOD in 2 weeks using an activated sludge inoculum at 30 mg/L and the Japanese MITI test(1).
An estimated BCF of 3 was calculated for cyanoacetic acid(SRC), using a log Kow of -0.76(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is low(SRC).
Using a structure estimation method based on molecular connectivity indices(1), the Koc for cyanoacetic acid can be estimated to be 1(SRC). According to a classification scheme(2), this estimated Koc value suggests that cyanoacetic acid is expected to have very high mobility in soil(SRC). In addition, the pKa of cyanoacetic acid is 2.45(3), indicating that this compound will exist primarily as an anion in the environment, and anions generally possess higher mobility in soil than their neutral counterpart(4).
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: UN3261 (For reference only, please check.)
IMDG: UN3261 (For reference only, please check.)
IATA: UN3261 (For reference only, please check.)
ADR/RID: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.)
IMDG: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.)
IATA: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.)
ADR/RID: 8 (For reference only, please check.)
IMDG: 8 (For reference only, please check.)
IATA: 8 (For reference only, please check.)
ADR/RID: I (For reference only, please check.)
IMDG: I (For reference only, please check.)
IATA: I (For reference only, please check.)
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available