Substances and mixtures, which in contact with water, emit flammable gases, Category 1
H260 In contact with water releases flammable gases which may ignite spontaneously
P223 Do not allow contact with water.
P231+P232 Handle and store contents under inert gas/....Protect from moisture.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P302+P335+P334 IF ON SKIN: Brush off loose particles from skin. Immerse in cool water [or wrap in wet bandages].
P370+P378 In case of fire: Use ... to extinguish.
P402+P404 Store in a dry place. Store in a closed container.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
no data available
Fresh air, rest. Half-upright position. Refer for medical attention.
Remove contaminated clothes. Rinse skin with plenty of water or shower.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth. Do NOT induce vomiting. Refer for medical attention . See Notes.
Eye and skin irritation (USCG, 1999)
If particles of calcium carbide are removed promptly /from eye/, healing may be rapid.
If material on fire or involved in fire: Do not use water. Use graphite, soda ash, powdered sodium chloride, or suitable dry powder. Carbon dioxide may be ineffective.
Behavior in Fire: If wet by water, highly flammable acetylene gas is formed. (USCG, 1999)
Use special powder, dry sand. NO other agents. In case of fire: keep drums, etc., cool by spraying with water. NO direct contact with water.
Remove all ignition sources. Sweep spilled substance into covered clean, dry containers. Carefully collect remainder. Then store and dispose of according to local regulations. Do NOT use water.
Remove all ignition sources. Sweep spilled substance into covered clean, dry containers. Carefully collect remainder. Then store and dispose of according to local regulations. Do NOT use water.
Keep water away from release. Shovel into suitable dry container.
NO contact with water. Use non-sparking handtools. Closed system, dust explosion-proof electrical equipment and lighting. Prevent deposition of dust. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Separated from incompatible materials. See Chemical Dangers. Dry. Well closed.Store in a cool dry, well ventilated location. Separate from oxidizing materials, water. Immediately remove and properly dispose of any spilled material.
no data available
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear safety goggles or eye protection in combination with breathing protection if powder.
Protective gloves. Protective clothing.
Use local exhaust or breathing protection.
no data available
Grayish-black irregular lump solid. Used to make acetylene and in steel manufacture.
Grayish-black, irregular lumps or orthorhombic crystals
Garlic-like
447°C
2300°C
Not combustible but forms flammable gas on contact with water or damp air. Many reactions may cause fire or explosion.
no data available
no data available
Not flammable (USCG, 1999)
no data available
no data available
At 1900 deg C, Mpa.s: 6000 (50% CaC2); 1700 (87% CaC2)
Reacts with water
no data available
no data available
2.22g/mLat 25°C(lit.)
no data available
no data available
Mixtures with silver nitrate and copper salts are shock-sensitive. Decomposes violently on contact with moisture or water. This produces highly flammable and explosive acetylene gas (ICSC 0089). This generates fire and explosion hazard. Reacts with chlorine, bromine, iodine, hydrogen chloride, lead, fluoride magnesium, sodium peroxide and sulfur. This generates fire and explosion hazard. Mixtures with iron (III) chloride, iron (III) oxide and tin (II) chloride ignite easily and burn fiercely.
no data available
Not combustible but forms flammable gas on contact with water or damp air. Many reactions may cause fire or explosion.CALCIUM CARBIDE is a reducing agent. May react vigorously with oxidizing materials. The powdered mixture of the acetylide and iron oxide and iron chloride burns violently upon ignition, producing molten iron. Calcium carbide incandesces with chlorine, bromine, or iodine at 245, 350, or 305°C., respectively, [Mellor, 1946, Vol. 5, 862]. The carbide burns incandescently when mixed and heated with lead difluoride, magnesium, hydrogen chloride, and tin (II) chloride, [Mellor, 1946, 1940, 1946, and 1941], respectively. Interaction of calcium carbide with methanol to give calcium methoxide is vigorous , but subject to an induction period of variable length. Once reaction starts, evolution of acetylene gas is very rapid, unpublished observations [Bretherick 1995]. Mixing calcium carbide with silver nitrate solutions forms silver acetylide, a highly sensitive explosive. Copper salt solutions would behave similarly, [Photogr. Sci. Eng., 1966, 10, 334]. The mixture of calcium carbide and sodium peroxide is explosive, as is calcium carbide and perchloryl fluoride as gases at 100-300°C.
no data available
Forms flammable and explosive gas and corrosive solid with moisture.
Decomposes in water with formation of acetylene and calcium hydroxide and evolution of heat.
no data available
no data available
no data available
no data available
no data available
no data available
The substance is corrosive to the eyes, skin and respiratory tract. Inhalation may cause lung oedema, but only after initial corrosive effects on eyes and/or airways have become manifest. See Notes.
no data available
A nuisance-causing concentration of airborne particles can be reached quickly when dispersed.
no data available
no data available
no data available
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: UN1402 (For reference only, please check.)
IMDG: UN1402 (For reference only, please check.)
IATA: UN1402 (For reference only, please check.)
ADR/RID: CALCIUM CARBIDE (For reference only, please check.)
IMDG: CALCIUM CARBIDE (For reference only, please check.)
IATA: CALCIUM CARBIDE (For reference only, please check.)
ADR/RID: 4.3 (For reference only, please check.)
IMDG: 4.3 (For reference only, please check.)
IATA: 4.3 (For reference only, please check.)
ADR/RID: I (For reference only, please check.)
IMDG: I (For reference only, please check.)
IATA: I (For reference only, please check.)
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available
Reacts violently with fire extinguishing agents such as water, producing explosive gas.The symptoms of lung oedema often do not become manifest until a few hours have passed and they are aggravated by physical effort.Rest and medical observation are therefore essential.See ICSC 0089.