Skin irritation, Category 2
Eye irritation, Category 2
Specific target organ toxicity – single exposure, Category 3
H315 Causes skin irritation
H319 Causes serious eye irritation
H335 May cause respiratory irritation
P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P271 Use only outdoors or in a well-ventilated area.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P321 Specific treatment (see ... on this label).
P332+P317 If skin irritation occurs: Get medical help.
P362+P364 Take off contaminated clothing and wash it before reuse.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P319 Get medical help if you feel unwell.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
no data available
Move the victim into fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and consult a doctor immediately. Do not use mouth to mouth resuscitation if the victim ingested or inhaled the chemical.
Take off contaminated clothing immediately. Wash off with soap and plenty of water. Consult a doctor.
Rinse with pure water for at least 15 minutes. Consult a doctor.
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
SYMPTOMS: Exposure to this chemical can cause irritation. ACUTE/CHRONIC HAZARDS: When heated to decomposition this compound emits toxic fumes of carbon monoxide, carbon dioxide and NOx. This chemical is harmful by inhalation, ingestion, or skin absorption. (NTP, 1992)
no data available
Fires involving this compound should be controlled with a dry chemical, carbon dioxide, or Halon extinguisher. (NTP, 1992)
Flash point data for this chemical are not available but it is probably combustible. (NTP, 1992)
Wear self-contained breathing apparatus for firefighting if necessary.
Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people away from and upwind of spill/leak.
Prevent further spillage or leakage if it is safe to do so. Do not let the chemical enter drains. Discharge into the environment must be avoided.
Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations.
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
no data available
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).
Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.
no data available
PHYSICAL DESCRIPTION: Off-white to pale yellow fluffy powder. (NTP, 1992)
Solid
no data available
285°C(dec.)(lit.)
117°C/4mmHg(lit.)
no data available
no data available
42°C(lit.)
no data available
no data available
no data available
no data available
less than 0.1 mg/mL at 61.7° F (NTP, 1992)
no data available
no data available
1.525 g/cm3
no data available
no data available
no data available
no data available
6-NITROBENZIMIDAZOLE is incompatible with strong oxidizing agents and strong bases. (NTP, 1992)
no data available
no data available
When heated to decomposition it emits toxic fumes of /nitrogen oxides/.
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
AEROBIC: 5-Nitrobenzimidazole, present at 100 mg/l, reached 0% of its theoretical BOD in 6 weeks using an activated sludge inoculum at 30 mg/l and the Japanese MITI test(1).
BCFs of 0.7-1.8 were measured for 5-nitrobenzimidazole(1). According to a classification scheme(2), this BCF suggests the potential for bioconcentration in aquatic organisms is low.
Using a structure estimation method based on molecular connectivity indices(1), the Koc for 5-nitrobenzimidazole can be estimated to be 120(SRC). According to a classification scheme(2), this estimated Koc value suggests that 5-nitrobenzimidazole is expected to have high mobility in soil. 5-Nitrobenzimidazole is predicted(3) to have two environmentally relevant pKa's, one at 3.7 and the other at 10.7, corresponding to the protonation and deprotonation of one of the nitrogens in the imidazole structure, respectively. Therefore, under neutral environmental conditions, 5-nitrobenzimidazole will exist in the uncharged form. At low pH, some 5-nitrobenzimidazole will be cationic, and in this form will be more likely to sorptive to soil particles.
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: UN3152 (For reference only, please check.)
IMDG: UN3152 (For reference only, please check.)
IATA: UN3152 (For reference only, please check.)
ADR/RID: POLYHALOGENATED BIPHENYLS, SOLID or HALOGENATED MONOMETHYLDIPHENYL- METHANES, SOLID or POLYHALOGENATED TERPHENYLS, SOLID (For reference only, please check.)
IMDG: POLYHALOGENATED BIPHENYLS, SOLID or HALOGENATED MONOMETHYLDIPHENYL- METHANES, SOLID or POLYHALOGENATED TERPHENYLS, SOLID (For reference only, please check.)
IATA: POLYHALOGENATED BIPHENYLS, SOLID or HALOGENATED MONOMETHYLDIPHENYL- METHANES, SOLID or POLYHALOGENATED TERPHENYLS, SOLID (For reference only, please check.)
ADR/RID: 9 (For reference only, please check.)
IMDG: 9 (For reference only, please check.)
IATA: 9 (For reference only, please check.)
ADR/RID: II (For reference only, please check.)
IMDG: II (For reference only, please check.)
IATA: II (For reference only, please check.)
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available