Acute toxicity - Category 4, Oral
Hazardous to the aquatic environment, long-term (Chronic) - Category Chronic 2
H302 Harmful if swallowed
H411 Toxic to aquatic life with long lasting effects
P264 Wash ... thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P273 Avoid release to the environment.
P301+P317 IF SWALLOWED: Get medical help.
P330 Rinse mouth.
P391 Collect spillage.
none
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
no data available
Fresh air, rest.
Remove contaminated clothes. Rinse and then wash skin with water and soap.
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth. Give a slurry of activated charcoal in water to drink. Rest. Refer for medical attention .
SYMPTOMS: Symptoms of exposure to this compound may include irritation of the skin, eyes, mucous membranes and upper respiratory tract. It may also cause headaches, nausea, vomiting, diarrhea, anemia, jaundice, euphoria, dermatitis, visual disturbances, convulsions and comatose. ACUTE/CHRONIC HAZARDS: This compound may be harmful by inhalation, ingestion or skin absorption. It is an irritant of the skin, eyes, mucous membranes and upper respiratory tract. When heated to decomposition it emits acrid smoke, irritating fumes and toxic fumes of carbon monoxide and carbon dioxide. (NTP, 1992)
Emergency and supportive measures: 1. Maintain an open air way and assist ventilation if necessary. 2. Treat coma and seizures if they occur. 3. Treat hemolysis and resulting hemoglobinuria if they occur by intravenous hydration and urinary alkalinization. Naphthalene
Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
This chemical is combustible. (NTP, 1992)
Use powder, foam, carbon dioxide.
Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting. Carefully collect remainder. Then store and dispose of according to local regulations. Do NOT let this chemical enter the environment.
Sweep spilled substance into covered containers. If appropriate, moisten first to prevent dusting. Carefully collect remainder. Then store and dispose of according to local regulations. Do NOT let this chemical enter the environment.
Accidental Release Measures. Personal precautions, protective equipment and emergency procedures: Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust. Environmental precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided. Methods and materials for containment and cleaning up: Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.
NO open flames. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Store in an area without drain or sewer access. Provision to contain effluent from fire extinguishing.Conditions for safe storage, including any incompatibilities: Keep container tightly closed in a dry and well-ventilated place.
TLV: 0.5 ppm as TWA; (skin); A4 (not classifiable as a human carcinogen)
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear safety goggles.
Protective gloves.
Use local exhaust.
no data available
PHYSICAL DESCRIPTION: White crystalline solid. (NTP, 1992)
Monoclinic crystals from alcohol
no data available
202°C(lit.)
241°C(lit.)
Combustible.
no data available
102°C(lit.)
no data available
no data available
no data available
no data available
less than 1 mg/mL at 70° F (NTP, 1992)
log Kow = 3.86
0.055 mm Hg at 25 deg C
1.01
no data available
no data available
Decomposes on heating. This produces acrid smoke and irritating fumes.
no data available
Combustible.2-METHYLNAPHTHALENE is incompatible with strong oxidizing agents. It is also incompatible with peroxides and oxygen. (NTP, 1992)
no data available
It... is incompatible with strong oxidizing agents.
Decomposes on heating. This produces acrid smoke and irritating fumes.
no data available
no data available
no data available
no data available
A4; Not classifiable as a human carcinogen.
no data available
The substance is irritating to the eyes.
Repeated or prolonged inhalation may cause effects on the lungs.
No indication can be given about the rate at which a harmful concentration of this substance in the air is reached on evaporation at 20°C.
AEROBIC: Aerobic aqueous screening test data showed a 84 and 95% loss of 0.1 ppm 2-methylnaphthalene in 1 and 5.6 days, respectively, for acclimated sewage inoculum and did not degrade with unacclimated sewage(1). When marine water was used to inoculate, 2-methylnaphthalene at a concentration of 0.067 ppm disappeared within 10 days under aerobic conditions at 25 deg C(2). Using the Japanese MITI I procedure, <5% degradation of 2-methylnaphthalene occurred in 28 days; however, for the MITI II test with a freshwater inoculum, 72% was lost in 28 days under aerobic conditions at 25 deg C(3). 2-Naphthoic acid was identified as a microbial co-oxidation product of 2-methylnaphthalene by mixed cultures of Norcardia sp. isolated from soil(4). 2-Methylnaphthalene showed a lag-period of two weeks, and then rapid degraded to 17% residual in the two weeks following the lag period and was not detected after 25 weeks, in a study using microcosms filled with soil (1.1% organic carbon, 6.5% kaolin) material and a coal derived wood-preservative(5). 2-Methylnaphthalene was aerobically biodegraded 100% in 4 different northern soils (arctic diesel fuel contaminated, PCB and associated oil contaminated, creosote-PAH contaminated, uncontaminated) incubated at 7 and 20 deg C for 90 days(6).
After 2, 3 and 5 weeks exposure, the BCF of 2-methylnaphthalene in the muscle tissue of Coho salmon (Onchorhynchus kisutch) was 30, 100 and 190, respectively. The BCF dropped to 70 within one week following 6 weeks exposure(1). After 2 weeks exposure, the average BCF of 2-methylnaphthalene in the muscle tissue of Starry flounder (Platichthys stellatus) was 895(1). BCF values in sheepshead minnows (Cyprinidon variegatus) exposed for 36 days to 2.46 and 23.63 ug/L of 2-methylnaphthalene were 2852 and 2921, respectively(2). Exposure of fingerling rainbow trout to 14C-(8)-2-methylnaphthalene (2573 dpm/ug) at 0.02 mg/L for four weeks in a continuous- flow delivery system resulted in maximum tissue levels from 40 to 300 times the water concentration; maximum bile 14C levels were 23,500 times the water concentration(3). A BCF of 407 has been reported for bluegill sunfish after exposure to 14C-(8)-2-methylnaphthalene at 0.013 ug/L for 26 days in a continuous-flow delivery system(4). According to a classification scheme(5), these BCF values suggest that 2-methylnaphthalene bioconcentration in aquatic organisms is low to very high(SRC), provided the compound is not metabolized by the organism(SRC). A BCF of 8.1 was reported for 2-methylnaphthalene in clams after 24 hours of exposure to a water concentration of 2-methylnaphthalene of 480 ug/L(6). The biota-sediment accumulation factor for 2-methylnaphthalene determined using oligochaete worm (Lumbriculus variegatus) was 4.2 and 0.11 in Lake Erie sediment from Vermilion, OH and Dunkirk, NY, respectively(7).
A log Koc value of 3.67 was reported in soil(1). An average sediment- or soil-water partition coefficient (log Kp) for 2-methylnaphthalene of 2.00 was determined from 17 measurements(2). The log Koc values for 2-methylnaphthalene in 75 sediment samples was 3.00-5.96(3). Measured Koc values have been reported as 4,400(4) and 8,500(5) for 2-methylnaphthalene. According to a classification scheme(6), these Koc values suggest that 2-methylnaphthalene is expected to have slight to no mobility in soil.
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: UN3077 (For reference only, please check.)
IMDG: UN3077 (For reference only, please check.)
IATA: UN3077 (For reference only, please check.)
ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (For reference only, please check.)
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (For reference only, please check.)
IATA: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (For reference only, please check.)
ADR/RID: 9 (For reference only, please check.)
IMDG: 9 (For reference only, please check.)
IATA: 9 (For reference only, please check.)
ADR/RID: III (For reference only, please check.)
IMDG: III (For reference only, please check.)
IATA: III (For reference only, please check.)
ADR/RID: Yes
IMDG: Yes
IATA: Yes
no data available
no data available
Insufficient data are available on the effect of this substance on human health, therefore utmost care must be taken.