2-ethylhexanal SDS
SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifier
- Product name： 2-ethylhexanal
- CAS： 123-05-7
Relevant identified uses of the substance or mixture and uses advised against
- Relevant identified uses： For R&D use only. Not for medicinal, household or other use.
- Uses advised against： none
Company Identification
- Company：Chemicalbook.in
- Address：5 vasavi Layout Basaveswara Nilayam Pragathi Nagar Hyderabad, India -500090
- Telephone：+91 9550333722
SECTION 2: Hazards identification
Classification of the substance or mixture
Flammable liquids, Category 3
Skin sensitization, Sub-category 1B
Reproductive toxicity, Category 2
GHS label elements, including precautionary statements
-
Pictogram(s)
- Signal word Warning
H226 Flammable liquid and vapour
H317 May cause an allergic skin reaction
H361 Suspected of damaging fertility or the unborn child
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233 Keep container tightly closed.
P240 Ground and bond container and receiving equipment.
P241 Use explosion-proof [electrical/ventilating/lighting/...] equipment.
P242 Use non-sparking tools.
P243 Take action to prevent static discharges.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P272 Contaminated work clothing should not be allowed out of the workplace.
P203 Obtain, read and follow all safety instructions before use.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse affected areas with water [or shower].
P370+P378 In case of fire: Use ... to extinguish.
P302+P352 IF ON SKIN: Wash with plenty of water/...
P333+P317 If skin irritation or rash occurs: Get medical help.
P321 Specific treatment (see ... on this label).
P362+P364 Take off contaminated clothing and wash it before reuse.
P318 IF exposed or concerned, get medical advice.
P403+P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in classification
no data available
SECTION 3: Composition/information on ingredients
Substance
- Chemical name: 2-ethylhexanal
- Common names and synonyms: 2-ethylhexanal
- CAS number: 123-05-7
- EC number: 204-596-5
- Concentration: 100%
SECTION 4: First aid measures
Description of necessary first-aid measures
Fresh air, rest. Artificial respiration may be needed. Refer for medical attention.
Remove contaminated clothes. Rinse skin with plenty of water or shower. Refer for medical attention .
First rinse with plenty of water for several minutes (remove contact lenses if easily possible), then refer for medical attention.
Rinse mouth. Rest. Refer for medical attention .
Most important symptoms/effects, acute and delayed
Inhalation may be irritating to mucous membrane; overexposure may cause dizziness and collapse. Ingestion causes irritation of mouth and stomach. Contact with eyes or skin causes irritation. (USCG, 1999)
Indication of immediate medical attention and special treatment needed, if necessary
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand-valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR as necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Aldehydes and Related Compounds
SECTION 5: Firefighting measures
Suitable extinguishing media
Use dry chemical, carbon dioxide or foam extinguishers.
Specific hazards arising from the chemical
Excerpt from ERG Guide 129 [Flammable Liquids (Water-Miscible / Noxious)]: HIGHLY FLAMMABLE: Will be easily ignited by heat, sparks or flames. Vapors may form explosive mixtures with air. Vapors may travel to source of ignition and flash back. Most vapors are heavier than air. They will spread along ground and collect in low or confined areas (sewers, basements, tanks). Vapor explosion hazard indoors, outdoors or in sewers. Those substances designated with a (P) may polymerize explosively when heated or involved in a fire. Runoff to sewer may create fire or explosion hazard. Containers may explode when heated. Many liquids are lighter than water. (ERG, 2016)
Special protective actions for fire-fighters
Use powder, AFFF, foam, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.
SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Do NOT let this chemical enter the environment. Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance.
Environmental precautions
Collect leaking and spilled liquid in sealable containers as far as possible. Absorb remaining liquid in sand or inert absorbent. Then store and dispose of according to local regulations. Do NOT let this chemical enter the environment. Personal protection: filter respirator for organic gases and vapours adapted to the airborne concentration of the substance.
Methods and materials for containment and cleaning up
Absorb liquids in vermiculite, dry sand, earth, peat, carbon, or a similar material and deposit in sealed containers. Keep ethyl hexaldehyde out of a confined space, such as a sewer, because of the possibility of an explosion ...
SECTION 7: Handling and storage
Precautions for safe handling
NO open flames, NO sparks and NO smoking. NO contact with hot surfaces. Above 46°C use a closed system, ventilation and explosion-proof electrical equipment. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Conditions for safe storage, including any incompatibilities
Fireproof. Separated from acids, bases and oxidants. Cool. Well closed.Store in tightly closed containers in a cool, well ventilated area away from oxidizers, strong bases and combustible materials.
SECTION 8: Exposure controls/personal protection
Control parameters
no data available
no data available
Appropriate engineering controls
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Individual protection measures, such as personal protective equipment (PPE)
Wear safety goggles.
Protective gloves.
Use ventilation.
no data available
SECTION 9: Physical and chemical properties and safety characteristics
-
Physical state：
Liquid.
-
Colour：
Colorless.
-
Odour：
Mild odor
-
Melting point/freezing point：
< -100 °C.
-
Boiling point or initial boiling point and boiling range：
159.6 °C. Atm. press.:760 mm Hg.
-
Flammability：
Flammable.
-
Lower and upper explosion limit/flammability limit：
Lower flammable limit: 0.85% by volume @ 93 deg C (200 deg F); Upper flammable limit: 7.2% by volume @135 deg C (275 deg F)
-
Flash point：
44 °C. Atm. press.:1 013.25 hPa.
-
Auto-ignition temperature：
190 °C. Atm. press.:1 013.25 hPa.
-
Decomposition temperature：
no data available
-
pH：
no data available
-
Kinematic viscosity：
dynamic viscosity (in mPa s) = 1. Temperature:20°C.
-
Solubility：
less than 1 mg/mL at 70° F (NTP, 1992)
-
Partition coefficient n-octanol/water：
log Pow = 3.07. Temperature:25 °C.
-
Vapour pressure：
2 hPa. Temperature:18.5 °C.;2.8 hPa. Temperature:23.4 °C.
-
Density and/or relative density：
0.85 g/cm3. Temperature:20 °C.
-
Relative vapour density：
4.42 (NTP, 1992) (Relative to Air)
-
Particle characteristics：
no data available
SECTION 10: Stability and reactivity
Reactivity
The substance can form explosive peroxides on prolonged contact with oxygen or air. The substance polymerizes on contact with sodium hydroxide, ammonia, butyl- and dibutylamine and inorganic acids. Reacts with oxidants.
Chemical stability
no data available
Possibility of hazardous reactions
Dangerous fire hazard; spontaneously flammable in air.The vapour is heavier than air.2-ETHYLHEXALDEHYDE is an aldehyde. Aldehydes are frequently involved in self-condensation or polymerization reactions. These reactions are exothermic; they are often catalyzed by acid. Aldehydes are readily oxidized to give carboxylic acids. Flammable and/or toxic gases are generated by the combination of aldehydes with azo, diazo compounds, dithiocarbamates, nitrides, and strong reducing agents. Aldehydes can react with air to give first peroxo acids, and ultimately carboxylic acids. These autoxidation reactions are activated by light, catalyzed by salts of transition metals, and are autocatalytic (catalyzed by the products of the reaction). The addition of stabilizers (antioxidants) to shipments of aldehydes retards autoxidation.
Conditions to avoid
no data available
Incompatible materials
Forms explosive mixture with air. Violent reaction with oxidizers. Incompatible with strong acids, caustics, ammonia, amines.
Hazardous decomposition products
When heated to decomposition it emits acrid and irritating fumes.
SECTION 11: Toxicological information
Acute toxicity
- Oral: LD50 - rat (male/female) - ca. 3.2 mL/kg bw.
- Inhalation: LC50 - rat (male/female) - > 6.83 mg/L air.
- Dermal: LD50 - rat (male/female) - > 16 440 mg/kg bw.
Skin corrosion/irritation
no data available
Serious eye damage/irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
no data available
Reproductive toxicity
no data available
STOT-single exposure
The substance is irritating to the eyes and skin. The vapour is irritating to the respiratory tract.
STOT-repeated exposure
Repeated or prolonged contact with skin may cause dermatitis.
Aspiration hazard
No indication can be given about the rate at which a harmful concentration of this substance in the air is reached on evaporation at 20°C.
SECTION 12: Ecological information
Toxicity
- Toxicity to fish: LC50 - Oncorhynchus mykiss (previous name: Salmo gairdneri) - 5.5 mg/L - 96 h.
- Toxicity to daphnia and other aquatic invertebrates: EC50 - Daphnia magna - 4.7 mg/L - 48 h.
- Toxicity to algae: EC50 - Pseudokirchneriella subcapitata (previous names: Raphidocelis subcapitata, Selenastrum capricornutum) - 6.9 mg/L - 72 h.
- Toxicity to microorganisms: EC0 - activated sludge, domestic - 48.8 mg/L - 30 min. Remarks:Respiration rate.
Persistence and degradability
AEROBIC: Using OECD Method 301F (Ready Biodegradability, Manometric Respirometry Test) with a domestic activated sludge inoculum and a 28-day incubation period, 2-ethylhexaldehyde had a theoretical BODT of 71.8%(1) which classifies it as readily biodegradable(SRC). By analogy, isobutyraldehyde (a structurally similar branched saturated aldehyde to 2-ethylhexaldhyde), present at 30 mg/L, reached 81% of its theoretical BOD in 4 weeks using an activated sludge inoculum at 100 mg/L in the Japanese MITI test(2).
Bioaccumulative potential
An estimated BCF of 49 was calculated in fish for 2-ethylhexaldehyde(SRC), using a log Kow of 3.07(1) and a regression-derived equation(2). According to a classification scheme(3), this BCF suggests the potential for bioconcentration in aquatic organisms is moderate(SRC).
Mobility in soil
Using a structure estimation method based on molecular connectivity indices(1), the Koc of 2-ethylhexaldehyde can be estimated to be 18(SRC). According to a classification scheme(2), this estimated Koc value suggests that 2-ethylhexaldehyde is expected to have very high mobility in soil(SRC).
Other adverse effects
no data available
SECTION 13: Disposal considerations
Disposal methods
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
SECTION 14: Transport information
UN Number
ADR/RID: UN1191 (For reference only, please check.)
IMDG: UN1191 (For reference only, please check.)
IATA: UN1191 (For reference only, please check.)
UN Proper Shipping Name
ADR/RID: OCTYL ALDEHYDES (For reference only, please check.)
IMDG: OCTYL ALDEHYDES (For reference only, please check.)
IATA: OCTYL ALDEHYDES (For reference only, please check.)
Transport hazard class(es)
ADR/RID: 3 (For reference only, please check.)
IMDG: 3 (For reference only, please check.)
IATA: 3 (For reference only, please check.)
Packing group, if applicable
ADR/RID: III (For reference only, please check.)
IMDG: III (For reference only, please check.)
IATA: III (For reference only, please check.)
Environmental hazards
ADR/RID: No
IMDG: No
IATA: No
Special precautions for user
no data available
Transport in bulk according to IMO instruments
no data available
SECTION 15: Regulatory information
Safety, health and environmental regulations specific for the product in question
SECTION 16: Other information
Abbreviations and acronyms
- CAS: Chemical Abstracts Service
- ADR: European Agreement concerning the International Carriage of Dangerous Goods by Road
- RID: Regulation concerning the International Carriage of Dangerous Goods by Rail
- IMDG: International Maritime Dangerous Goods
- IATA: International Air Transportation Association
- TWA: Time Weighted Average
- STEL: Short term exposure limit
- LC50: Lethal Concentration 50%
- LD50: Lethal Dose 50%
- EC50: Effective Concentration 50%
References
- IPCS - The International Chemical Safety Cards (ICSC), website: http://www.ilo.org/dyn/icsc/showcard.home
- HSDB - Hazardous Substances Data Bank, website: https://toxnet.nlm.nih.gov/newtoxnet/hsdb.htm
- IARC - International Agency for Research on Cancer, website: http://www.iarc.fr/
- eChemPortal - The Global Portal to Information on Chemical Substances by OECD, website: http://www.echemportal.org/echemportal/index?pageID=0&request_locale=en
- CAMEO Chemicals, website: http://cameochemicals.noaa.gov/search/simple
- ChemIDplus, website: http://chem.sis.nlm.nih.gov/chemidplus/chemidlite.jsp
- ERG - Emergency Response Guidebook by U.S. Department of Transportation, website: http://www.phmsa.dot.gov/hazmat/library/erg
- Germany GESTIS-database on hazard substance, website: http://www.dguv.de/ifa/gestis/gestis-stoffdatenbank/index-2.jsp
- ECHA - European Chemicals Agency, website: https://echa.europa.eu/
Other Information
Check for peroxides prior to distillation; eliminate if found.