Skin corrosion, Sub-category 1B
H314 Causes severe skin burns and eye damage
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P264 Wash ... thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection/...
P301+P330+P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P363 Wash contaminated clothing before reuse.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P316 Get emergency medical help immediately.
P321 Specific treatment (see ... on this label).
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
no data available
Fresh air, rest. Refer for medical attention.
Remove contaminated clothes. Rinse skin with plenty of water or shower for at least 15 minutes. Refer for medical attention .
Rinse with plenty of water for several minutes (remove contact lenses if easily possible). Refer for medical attention.
Rinse mouth. Give one or two glasses of water to drink. Do NOT induce vomiting. Refer for medical attention .
SYMPTOMS: Symptoms of exposure to this compound may include skin, eye and upper respiratory tract irritation. ACUTE/CHRONIC HAZARDS: This compound may cause skin, eye and respiratory tract irritation. When heated to decomposition it emits toxic fumes. (NTP, 1992)
no data available
Fires involving this compound can be controlled with a dry chemical, carbon dioxide or Halon extinguisher. (NTP, 1992)
This chemical is combustible. (NTP, 1992)
Use water spray, foam, powder, carbon dioxide. In case of fire: keep drums, etc., cool by spraying with water.
Personal protection: chemical protection suit and protective gloves. Do NOT let this chemical enter the environment. Collect leaking liquid in sealable containers. Absorb remaining liquid in dry sand or inert absorbent. Then store and dispose of according to local regulations.
Personal protection: chemical protection suit and protective gloves. Do NOT let this chemical enter the environment. Collect leaking liquid in sealable containers. Absorb remaining liquid in dry sand or inert absorbent. Then store and dispose of according to local regulations.
Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations.
NO open flames. Above 87°C use a closed system and ventilation. Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Separated from food and feedstuffs. Dry. Well closed. Store in an area without drain or sewer access. Provision to contain effluent from fire extinguishing.
Component | 2-chlorobenzaldehyde | |||
---|---|---|---|---|
CAS No. | 89-98-5 | |||
Limit value - Eight hours | Limit value - Short term | |||
ppm | mg/m3 | ppm | mg/m3 | |
Canada - Ontario | ? | ? | 4 | 23 |
Remarks |
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear safety goggles or face shield.
Protective gloves. Protective clothing.
Use ventilation, local exhaust or breathing protection.
no data available
Liquid.
Clear to yellowish.
no data available
11.9 °C.
213.6 °C. Atm. press.:1 013.3 hPa.
Combustible. Gives off irritating or toxic fumes (or gases) in a fire.
no data available
97 °C. Atm. press.:1 000.6 hPa.
360 °C. Atm. press.:Ca. 1 Bar.
no data available
no data available
no data available
1 to 5 mg/mL at 75° F (NTP, 1992)
log Pow = 2.44. Temperature:25 °C.
4.6 Pa. Temperature:20 °C.;8.3 Pa. Temperature:25 °C.;95.2 Pa. Temperature:50 °C.
1.25 g/cm3. Temperature:20 °C.
4.84 (vs air)
no data available
Decomposes on heating. This produces toxic and corrosive fumes including hydrogen chloride (see ICSC 0163).
no data available
2-CHLOROBENZALDEHYDE reacts with iron and strong oxidizers, strong bases and strong reducing agents. (NTP, 1992)
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
The substance is severely irritating to the eyes, skin and possibly the respiratory tract.
no data available
No indication can be given about the rate at which a harmful concentration of this substance in the air is reached on evaporation at 20°C.
no data available
no data available
no data available
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: UN3265 (For reference only, please check.)
IMDG: UN3265 (For reference only, please check.)
IATA: UN3265 (For reference only, please check.)
ADR/RID: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.)
IMDG: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.)
IATA: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (For reference only, please check.)
ADR/RID: 8 (For reference only, please check.)
IMDG: 8 (For reference only, please check.)
IATA: 8 (For reference only, please check.)
ADR/RID: I (For reference only, please check.)
IMDG: I (For reference only, please check.)
IATA: I (For reference only, please check.)
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available
The apparent melting point caused by loss of crystal water is given.