Not classified.
none
none
none
none
none
no data available
Move the victim into fresh air. If breathing is difficult, give oxygen. If not breathing, give artificial respiration and consult a doctor immediately. Do not use mouth to mouth resuscitation if the victim ingested or inhaled the chemical.
Take off contaminated clothing immediately. Wash off with soap and plenty of water. Consult a doctor.
Rinse with pure water for at least 15 minutes. Consult a doctor.
Rinse mouth with water. Do not induce vomiting. Never give anything by mouth to an unconscious person. Call a doctor or Poison Control Center immediately.
no data available
Immediate first aid: Ensure that adequate decontamination has been carried out. If patient is not breathing, start artificial respiration, preferably with a demand valve resuscitator, bag-valve-mask device, or pocket mask, as trained. Perform CPR if necessary. Immediately flush contaminated eyes with gently flowing water. Do not induce vomiting. If vomiting occurs, lean patient forward or place on the left side (head-down position, if possible) to maintain an open airway and prevent aspiration. Keep patient quiet and maintain normal body temperature. Obtain medical attention. Poisons A and B
Fires involving this compound should be controlled using a dry chemical, carbon dioxide, foam or Halon extinguisher. (NTP, 1992)
Flash point data for this compound are not available but it is probably non-flammable. (NTP, 1992)
Wear self-contained breathing apparatus for firefighting if necessary.
Avoid dust formation. Avoid breathing mist, gas or vapours.Avoid contacting with skin and eye. Use personal protective equipment.Wear chemical impermeable gloves. Ensure adequate ventilation.Remove all sources of ignition. Evacuate personnel to safe areas.Keep people away from and upwind of spill/leak.
Prevent further spillage or leakage if it is safe to do so. Do not let the chemical enter drains. Discharge into the environment must be avoided.
Collect and arrange disposal. Keep the chemical in suitable and closed containers for disposal. Remove all sources of ignition. Use spark-proof tools and explosion-proof equipment. Adhered or collected material should be promptly disposed of, in accordance with appropriate laws and regulations.
Handling in a well ventilated place. Wear suitable protective clothing. Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Use non-sparking tools. Prevent fire caused by electrostatic discharge steam.
Store the container tightly closed in a dry, cool and well-ventilated place. Store apart from foodstuff containers or incompatible materials.
no data available
no data available
Ensure adequate ventilation. Handle in accordance with good industrial hygiene and safety practice. Set up emergency exits and the risk-elimination area.
Wear tightly fitting safety goggles with side-shields conforming to EN 166(EU) or NIOSH (US).
Wear fire/flame resistant and impervious clothing. Handle with gloves. Gloves must be inspected prior to use. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
If the exposure limits are exceeded, irritation or other symptoms are experienced, use a full-face respirator.
no data available
PHYSICAL DESCRIPTION: White powder. (NTP, 1992)
Needles from benzene/ethanol
no data available
222 deg C
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
Insoluble at 66° F) (NTP, 1992)
log Kow = 8.9
1.89X10-10 mm Hg at 25 deg C (est)
2.58
no data available
no data available
no data available
no data available
Simple aromatic halogenated organic compounds, such as 1,2-BIS(2,4,6-TRIBROMOPHENOXY)ETHANE, are very unreactive. Halogenated organics generally become less reactive as more of their hydrogen atoms are replaced with halogen atoms. Materials in this group may be incompatible with strong oxidizing and reducing agents. Also, they are incompatible with many amines, nitrides, azo/diazo compounds, alkali metals, and epoxides.
no data available
no data available
When heated to decomposition it emits toxic vapors of bromide.
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
no data available
AEROBIC: 1,2-Bis(2,4,6-tribromophenoxy)ethane, incubated at concentrations of 1%, 0.01% and 1 ppm, reached only 1.1, 0.53, and 1.41% mineralization, respectively, in a 26 to 30 week period using an acclimated sewage and garden soil inoculum(1).
BCF values of 8.6-27.1 and 25.4-43.6 at 0.3 and 0.03 ppm, respectively, in an 8-week study using carp (Cyprinus carpio) were measured for 1,2-bis(2,4,6-tribromophenoxy)ethane(1). According to a classification scheme(2), these BCF values suggest the potential for bioconcentration in aquatic organisms is low to moderate.
The Koc of 1,2-bis(2,4,6-tribromophenoxy)ethane is estimated as 910,000(SRC), using a log Kow of 8.9(1) and a regression-derived equation(2). According to a classification scheme(2), this estimated Koc value suggests that 1,2-bis(2,4,6-tribromophenoxy)ethane is expected to be immobile in soil.
no data available
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing. Do not contaminate water, foodstuffs, feed or seed by storage or disposal. Do not discharge to sewer systems.
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning. Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill. Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
ADR/RID: UN3152 (For reference only, please check.)
IMDG: UN3152 (For reference only, please check.)
IATA: UN3152 (For reference only, please check.)
ADR/RID: POLYHALOGENATED BIPHENYLS, SOLID or HALOGENATED MONOMETHYLDIPHENYL- METHANES, SOLID or POLYHALOGENATED TERPHENYLS, SOLID (For reference only, please check.)
IMDG: POLYHALOGENATED BIPHENYLS, SOLID or HALOGENATED MONOMETHYLDIPHENYL- METHANES, SOLID or POLYHALOGENATED TERPHENYLS, SOLID (For reference only, please check.)
IATA: POLYHALOGENATED BIPHENYLS, SOLID or HALOGENATED MONOMETHYLDIPHENYL- METHANES, SOLID or POLYHALOGENATED TERPHENYLS, SOLID (For reference only, please check.)
ADR/RID: 9 (For reference only, please check.)
IMDG: 9 (For reference only, please check.)
IATA: 9 (For reference only, please check.)
ADR/RID: II (For reference only, please check.)
IMDG: II (For reference only, please check.)
IATA: II (For reference only, please check.)
ADR/RID: No
IMDG: No
IATA: No
no data available
no data available