Sodium Diisobutyl Dithiophosphate / Sodium O,O-diisobutyl dithiophosphate Sodium Diisobutyl Dithiophosphate 50000mt per year

Sodium Diisobutyl Dithiophosphate 

So far the largest production capacity factory in China

Highly quality and immedaite delivery

Sodium O,O-diisobutyl dithiophosphate Chemical Properties

Molecular Structure:

Molecular Formula: C₈H₁₈NaO₂PS₂ 
Molecular Weight: 264.3209 
IUPAC Name: Sodium bis(2-methylpropoxy)-sulfanylidene-sulfido-$l^{5}-phosphane 
Synonyms of Sodium O,O-diisobutyl dithiophosphate (CAS NO.53378-51-1): EINECS 258-508-5 ; Isobutyl sodium phosphorodithioate ; Phosphorodithioic acid, O,O-bis(2-methylpropyl) ester, sodium salt ; Sodium diisobutyldithiophosphate ; Phosphorodithioic acid, O,O-bis(2-methylpropyl) ester, sodium salt (1:1) 
CAS NO: 53378-51-1 
Flash Point: 130.9 °C 
Enthalpy of Vaporization: 51.1 kJ/mol 
Boiling Point: 292.8 °C at 760 mmHg 
Vapour Pressure: 0.00314 mmHg at 25°C

DITHIOPHOSPHATE BA

CAS Number: 

Major component: Ammonium dibutyldithiophosphate

Molecular Formula: (C₄H₉O)₂PSSNH4

Structural Formula:

Description: 
White to pale grey powder, odourless, deliquescent in air, soluble in water, chemically stable.

Principal uses:
Dithiophosphate BA is an excellent collector with frothing performance in flotation of nonferrous metallic minerals. It exhibits specific properties for separating silver, copper, lead and activated zinc sulfide minerals and difficult polymetallic ores. The collective performance of Dithiophosphate BA is weak for the pyrite and magnetizing pyrite, but is strong for the galena in the weak base ore pulp. It is also useful in the flotation of nickel and antimony sulfide minerals and is especially useful in the flotation of nickel sulfide mineral with low flotability, mixture of sulfide-oxide nickel ores and middlings of sulfide with gangue. Dithiophosphate BA is also helpful in recovery of platinum, gold and silver.

Specification:

Storage & transport:
To be protected from water, torrid sunlight and fire, no lain down, no upside down.

Hot Tags: Sodium O-isobutyl dithiocarbonate CAS 25306-75-6 sodium butan-2-yloxymethanedithioic acid Sodium Isobutyl Xanthate 90% Carbonodithioic acidO-(2-methylpropyl) estersodium salt

Previous: Sodium Amyl Xanthate (SAX) CAS 7607-99-0 90%

Next: Sodium Butyl Xanthate (SBX) CAS 141-33-3 90%

Related Products

• Selective collector with higher recovery than SEX

Sodium isopropyl xanthate (SIPX) and sodium isobutyl xanthate (SIBX) are typically used when the collector needs to be stronger than SEX without compromising too much on selectivity, for instance in some copper-gold, copper-zinc and nickel operations. In some parts of the world where postassium hydroxide is more readily available than sodium hydroxide for xanthate manufacture, the use of xanthates such as PEX (potassium ethyl xanthate) and PIBX (potassium isobutyl xanthate) may be more common. SIPX is the most used chemical reagent in Peru for the treatment of polymetallic minerals.

 Xanthates in mining.

Xanthates have been the workhorse of sulfide mineral flotation since the 1920’s (Harris 1989), and they represent the largest volume of any sulfide mineral collector. Xanthate collectors are salts consisting of a non-polar hydrocarbon group, which provides the hydrophobicity to a sulphide mineral, pointing outward from the mineral to the solution, and a polar group that adsorbs onto the sulphide mineral surface.

PRODUCTION OF XANTHATES:

RAW MATERIALS: are Carbon Disulfide, Caustic Soda (Sodium Hydroxide) or Potash (Potassium Hydroxide) and a determined alcohol, which provides it with collecting properties in flotation processes of metallic and polymetallic minerals.

WHAT IS THE QUALITY OF YOUR XANTHATE  

The production of pure xanthates requires pure raw materials and then the reaction must also be driven to completion. This requires sophisticated process design and control of the manufacturing process which, in turn, influence the price and metallurgical efficiency of the product.

DOWNLOAD OUR CASE STUDY TO AVOID BUYING SUB-STANDARD XANTHATE! 

XANTHATE APPLICATION:

All Xanthates are water-soluble and are usually fed in as aqueous solutions in a 5 to 20% strength.

These reagents are widely used for all sulfide minerals, with a high tendency to float iron sulfide, except when using depressors. They cannot be used in highly acidic circuits, as they tend to decompose.

Kemcore carries common Xanthate products equivalent or similar to:

Our range of modifiers, collectors and frothers are produced in fully integrated world-class facilities in China and Kemcore guarantees a continuous supply to our customers worldwide. 

Advantages of Xanthate.

1. The least expensive sulfide mineral collector-Inexpensive compared to Specialty Collectors
2. Easy to manufacture and available in solid pellet form for easy handling
3. Dosage: in plant environment they’re fed at active concentrations of 5% or less in water.
4. Very good at recovering in an unselectve manner bulk sulfide minerals, including sulfides.
5. Can be used with lime to give a pH operating range of 9-12.
6. Can be used as a sole collector in a sulfide mineral plant. 

Plant Operation Tips –

- The sequence of addition of modifiers, collectors and frothers is of great importance, especially when sulphidising agents and other activators and depressants are involved.

- Flotation is a process that relies heavily on surface chemistry, by adding all of the collectors to the conditioner, a thick, scummy and uncontrollable froth is obtained which yields a low and unmarketable grade concentrate with entrained insoluble minerals. Therefore careful consideration should be taken when selecting reagent-dosing points in the plant so that recovery and grade are optimised.

-When trialling additional or different collectors maintain a visual inspection history of the froth and concentrate in each circuit

- Data from each shift should be collected over the duration of the trial so that shift recoveries and grades can be determined and to ascertain whether the trial collector is better or worse than the incumbent collector.

Chemwill Asia co.,Ltd is one of the leading manufacturer of Sodium Isobutyl Xanthate in CHINA. 

Our main production base is located in Xuzhou industry park. We produce a wide range of organics including Active pharmaceutical ingredients(APIs), Veterinary,  Indole derivatives, Aromatics, Fluorine, Boronic acids, organocatalysts, chiral building blocks, heterocyclic compounds. We are certified both to the ISO 9001 and ISO 14001 Standards, have a safety management system in place. 

Our R&D team masters core technology for process-design of target building block as well as Tailor-made fine chemicals. Our manufactory specialised in extreme temperature conditions (-100ºC to +300ºC), hydrogenations reaction under high pressure, suzuki coupling reaction, photochemical reaction, Mitsunobu reactions, enantioselective reactions and asymmetric synthesis. 

Think Chemistry,Think CHemWill

Factory Plant Address:
High-Tech Industrial park,Chemical Economical Development Zone,Xuzhou, Jiangsu-Province, P.R.China


Shanghai office: (Export Department)
Address: 16FL., INDUSTRY & COMMERCIAL BUILDING, NO.45 YAN’AN ROAD(E), 200002, SHANGHAI, CHINA
 

---any inquiries will be replied within 12 hours.

---golden manufactory under iso/gmp with large stock.

---dedication to quality,we have strict quality control system. 

---oem/odm available.

---sample is available for your evaluation & formulation developmen

Ms Mary Chi  -  Sales manager 

Website: http://www.chemwill.com