Ethylene thiourea Powder
Price | USD15.00 |
Packge | 1KG |
- Min. Order:1KG
- Supply Ability:1 ton
- Time:2021-12-01
Product Details
- Product NameEthylene thiourea
- CAS No.96-45-7
- EINECS No.213-579-1
- MFC3H6N2S
- MW102.16
- InChIKeyPDQAZBWRQCGBEV-UHFFFAOYSA-N
- AppearancePowderWhite
- storage temp. Store below +30°C.
- Water Solubility 19 g/L (20 ºC)
- Melting point 196-200 °C(lit.)
- density 1.41~1.45
- Boiling point 240°C (1010 hPa)
em | Index | ||
Superior Grade | First grade | Qualified Grade | |
Appearance (Visual inspection) | white powder | ||
Initial M.P, oC ≥ | 195 | 193 | 192 |
Loss on drying, % ≤ | 0.3 | 0.3 | 0.5 |
Ash, % ≤ | 0.3 | 0.3 | 0.5 |
Residues on 150μm sieve, % ≤ | 0.5 | 0.1 | 0.1 |
Ethylene Thiourea ETU(NA-22) Vulcanizing Accelerator CAS NO. 96-45-7 Properties |
White powder. Little bitter. Density is 1.42-1.43. Soluble in water,alcohol, ethylene glycol and pyridine, insoluble in ether, benzene, chloroform and petroleum ether. final products is no pollution. Stable storage
Ethylene Thiourea ETU(NA-22) Vulcanizing Accelerator CAS NO. 96-45-7 Application |
The product can be used for chloroprene rubber, Epichlorohydrin rubber, chlorinated polyethylene, etc., are particularly suited for non-curing system of the chlorine-butylamine Hopewell accelerator. can form the best rapid vulvanization with the right selection system during 100-500*C, and the whole parade security. Its vulcanized products is with high tensile strength, small permanent deformation, a non-curing system used for W (54-1 type polychloroprene) has obvious effect.. It usually use together with zinc oxide and magnesium oxide, mainly for industrial products, and coating lines, shoes and other clothing chloroprene rubber products.
Company Profile Introduction
Recommended supplier
-
VIP1年
- SS Reagents and Chemicals
- 96-45-7 Ethylene Thiourea 99%
- Inquiry
- 2024-10-24
- Since:2019-01-04
- Address: 2-2-1901, Huachenglvzhou 1st Phase. No.169 Shengli Nan Street,Qiaoxi District ,Shijiazhuang city, H