CHEMICAL AND PHYSICAL PROPERTIES
Physical Description | 1,1,1,2-tetrachloro-2,2-difluoroethane is a colorless solid with a slight, ether-like odor. mp: 40.6 °C; bp: 91.5 °C. |
---|---|
Color/Form | Colorless liquid or solid |
Odor | Slight ether odor |
Boiling Point | 197 °F at 760 mmHg (NIOSH, 2023) |
Melting Point | 105 °F (NIOSH, 2023) |
Solubility | 0.01 % (NIOSH, 2023) |
Density | 1.65 (NIOSH, 2023) - Denser than water; will sink |
Vapor Density | 7.0 (Air = 1) |
Vapor Pressure | 40 mmHg (NIOSH, 2023) |
LogP | 3.41 |
Decomposition | Decomposes on contact with hot surfaces or flames. This produces toxic fumes including hydrogen chloride, hydrogen fluoride and phosgene. |
Viscosity | 2.1583X10-3 Pa.s at 313.75 K |
Corrosivity | Special precautions: 1,1,1,2-tetrachloro-2,2-difluoroethane will attack some forms of plastics, rubber, and coatings. |
Heat of Vaporization | 3.4838X10+7 J/mol at 313.75 K |
Surface Tension | 2.7913X10-2 N/m at 313.75 K |
Relative Evaporation Rate | Greater than 1 (Butyl acetate = 1) |
Kovats Retention Index | 702 702 785 785 |
Other Experimental Properties | 1 mg/L is equivalent to 120 ppm and 1 ppm is equivalent to 8.33 mg/cu m at 25 °C, 760 mm Hg |
Chemical Classes | Solvents -> Chlorofluorocarbons |
COMPUTED DESCRIPTORS
Molecular Weight | 203.8 g/mol |
---|---|
XLogP3 | 3.4 |
Hydrogen Bond Donor Count | 0 |
Hydrogen Bond Acceptor Count | 2 |
Rotatable Bond Count | 0 |
Exact Mass | 203.869267 g/mol |
Monoisotopic Mass | 201.872217 g/mol |
Topological Polar Surface Area | 0 Ų |
Heavy Atom Count | 8 |
Formal Charge | 0 |
Complexity | 84.5 |
Isotope Atom Count | 0 |
Defined Atom Stereocenter Count | 0 |
Undefined Atom Stereocenter Count | 0 |
Defined Bond Stereocenter Count | 0 |
Undefined Bond Stereocenter Count | 0 |
Covalently-Bonded Unit Count | 1 |
Compound Is Canonicalized | Yes |
PRODUCT INTRODUCTION
description
1,1,1,2-tetrachloro-2,2-difluoroethane is a colorless solid with a slight, ether-like odor. mp: 40.6 °C; bp: 91.5 °C.