CHEMICAL AND PHYSICAL PROPERTIES
Physical Description | Sodium 2-mercaptobenzothiazol solution appears as an amber liquid with an odor of old rubber. A 50% aqueous solution. Denser than water. (USCG, 1999) |
---|---|
Color/Form | LIGHT-AMBER LIQUID /50% AQUEOUS SOLN/ |
Boiling Point | 217 °F at 760 mmHg (NTP, 1992) |
Melting Point | 21 °F (NTP, 1992) |
Flash Point | greater than 200 °F (NTP, 1992) |
Solubility | greater than or equal to 100 mg/mL at 68 °F (NTP, 1992) |
Density | 1.25 to 1.28 at 77 °F (NTP, 1992) |
Vapor Pressure | 24 mmHg at 77 °F (NTP, 1992) |
LogP | As an ionic salt the partition coefficient is expected to be neg. |
Viscosity | Sodium mercaptobenzothiazole in motor oil soln maintains a uniform viscosity over a large temp range. |
Corrosivity | Not corrosive to metals as a 50% aq soln. |
pH | Alkaline as a 50% aq solution |
Other Experimental Properties | Specific gravity of a 50% aq soln: 1.25 @ 25/15 °C. |
Chemical Classes | Plastics & Rubber -> Rubber Additives |
SAFETY INFORMATION
Signal word | Warning |
---|---|
Pictogram(s) |
Exclamation Mark Irritant GHS07 |
GHS Hazard Statements |
H315:Skin corrosion/irritation H335:Specific target organ toxicity, single exposure;Respiratory tract irritation |
Precautionary Statement Codes |
P261:Avoid breathing dust/fume/gas/mist/vapours/spray. P264:Wash hands thoroughly after handling. P264:Wash skin thouroughly after handling. P271:Use only outdoors or in a well-ventilated area. P280:Wear protective gloves/protective clothing/eye protection/face protection. P312:Call a POISON CENTER or doctor/physician if you feel unwell. P321:Specific treatment (see … on this label). P362:Take off contaminated clothing and wash before reuse. P302+P352:IF ON SKIN: wash with plenty of soap and water. P304+P340:IF INHALED: Remove victim to fresh air and Keep at rest in a position comfortable for breathing. P332+P313:IF SKIN irritation occurs: Get medical advice/attention. P405:Store locked up. P403+P233:Store in a well-ventilated place. Keep container tightly closed. P501:Dispose of contents/container to..… |
COMPUTED DESCRIPTORS
Molecular Weight | 189.2 g/mol |
---|---|
Hydrogen Bond Donor Count | 0 |
Hydrogen Bond Acceptor Count | 3 |
Rotatable Bond Count | 0 |
Exact Mass | 188.96828576 g/mol |
Monoisotopic Mass | 188.96828576 g/mol |
Topological Polar Surface Area | 42.1 Ų |
Heavy Atom Count | 11 |
Formal Charge | 0 |
Complexity | 134 |
Isotope Atom Count | 0 |
Defined Atom Stereocenter Count | 0 |
Undefined Atom Stereocenter Count | 0 |
Defined Bond Stereocenter Count | 0 |
Undefined Bond Stereocenter Count | 0 |
Covalently-Bonded Unit Count | 2 |
Compound Is Canonicalized | Yes |
PRODUCT INTRODUCTION
description
Sodium 2-mercaptobenzothiazol solution appears as an amber liquid with an odor of old rubber. A 50% aqueous solution. Denser than water. (USCG, 1999)